Try 2.2.14 or 2.2.pre17 ....
2.2.16 has problems with scsi drivers ...
Regards,
Zoran
On Mon, 7 Aug 2000, Igmar Palsenberg wrote:
>
> Hi,
>
> Was playing to get this SCSI working, I discovered it is very good at
> hanging this system :-))
>
> Linux 2.2.16
> ncr53c400 (ncr8380) driver
>
> When specifying the IO adress and IRQ, the system gives :
>
> scsi0: SCSI bus busy, waiting up to 5 seconds
> scsi0: bus busy, attempting abort
>
> Then the system hangs. I can CTRL-ALT-DEL for an immediate reboot, but I
> didn't get the card working..
>
> Anyone any hints / way to debug this ?
>
>
>
> Regards,
>
>
> Igmar
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Aug 15 2000 - 21:00:14 EST