2.4.0-test2-pre11 AIC7xxx timeout

From: Keith Owens (kaos@ocs.com.au)
Date: Thu Jun 22 2000 - 20:39:51 EST

Next message: Zoran Davidovac: "Re: [PATCH] Fix videodev for bttv changes"
Previous message: Mark Clayton: "bug? ioctl calls fail for raw sockets"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Consistent aic7xxx timeouts on 2.4.0-test2-pre11 SMP.

(scsi0) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 0/12/0
(scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 392 instructions downloaded
(scsi1) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 0/12/1
(scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 392 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
<Adaptec AIC-7896/7 Ultra2 SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.1/5.2.0
<Adaptec AIC-7896/7 Ultra2 SCSI host adapter>
scsi : 2 hosts.
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00

2.4.0-test1-ac21 works fine using the same hardware, compiler and config.

(scsi0) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 0/12/0
(scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 392 instructions downloaded
(scsi1) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 0/12/1
(scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 392 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.0/3.2.4
       <Adaptec AIC-7896/7 Ultra2 SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.0/3.2.4
       <Adaptec AIC-7896/7 Ultra2 SCSI host adapter>
scsi : 2 hosts.
(scsi0:0:1:0) Synchronous at 80.0 Mbyte/sec, offset 31.
  Vendor: IBM Model: DNES-318350Y Rev: SAA0
  Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
  Vendor: SGI1200 Model: Server Family Rev: 1.01
  Type: Processor ANSI SCSI revision: 02
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 35843670 [17501 MB] [17.5 GB]
Partition check:
/dev/scsi/host0/bus0/target1/lun0: p1 p2 p3 p4 < p5 p6 p7 >

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

Next message: Zoran Davidovac: "Re: [PATCH] Fix videodev for bttv changes"
Previous message: Mark Clayton: "bug? ioctl calls fail for raw sockets"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Fri Jun 23 2000 - 21:00:25 EST