On Fri, Jun 09, 2000 at 12:34:12PM -0600, you [James Bourne] claimed:
> On Fri, 9 Jun 2000, Ville Herva wrote:
>
> > > Jun 8 22:49:47 babbage kernel: hdc: timeout waiting for DMA
> > > Jun 8 22:49:47 babbage kernel: ide_dmaproc: chipset supported
> > > ide_dma_timeout func only: 12
> > > Jun 8 22:49:47 babbage kernel: hdc: irq timeout: status=0xd0 { Busy }
> > > Jun 8 22:49:48 babbage kernel: ide1: reset: success
> >
> I've seen this on a VIA82CXXX. What I found had to be done was set the
> drives to UDMA-66 mode 4 (Quantum LM in this case). That would fix the
> problem of the driver resetting the bus and drives to non-dma. Also,
> ide0=ata66 was used in lilo.
This is an oldish Seagate 6GB, so it can't do ATA66. The curious thing is
that it doesn't seem to work in PIO mode either. And IDE resets lock the
machine up.
-- v --
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Jun 15 2000 - 21:00:19 EST