On Wed, 7 Jun 2000, I Lee Hetherington wrote:
> Is someone working on the broken aic7xxx? I'd like to bang on
> 2.4.0-test but I get stuck in an infinite loop of scsi hangs with an
> aic7890 and a Cheetah.
>
> --Lee Hetherington
>
>
I am having the same problem with a 2940 and (scsi-3) st32272w and a
(scsi-2) cd (rw) here is the output
enable_irq() unbalanced from c88493a2
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.0/3.2.4
<Adaptec AHA-294X Ultra SCSI host adapter>
scsi : 1 host.
scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0,
lun 0 Inquiry 00 00 00 ff 00
SCSI host 0 abort (pid 0) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 channel 0 reset (pid 0) timed out - trying harder
SCSI bus is being reset for host 0 channel 0.
SCSI host 0 reset (pid 0) timed out again -
probably an unrecoverable SCSI bus or device hang.
I am going to try a patch now I got from this list I will tell you what
happens.
Enjoy,
Richard Rager
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jun 07 2000 - 21:00:29 EST