Hi,
I have been doing lots of backing up here. After going to ac10
this is no longer possible. I get all sorts of errors like:
mt -f /dev/ht0 status
and kern.log shows:
Jun 6 16:57:45 oscar kernel: ide-tape: Reached idetape_chrdev_open
Jun 6 16:57:45 oscar kernel: ide-tape: ht0: I/O error, pc = 10, key = 2, asc = 4, ascq = 1
Jun 6 16:57:45 oscar kernel: ide-tape: Block location is unknown to the tape
Jun 6 16:57:45 oscar kernel: ide-tape: ht0: I/O error, pc = 1, key = 2, asc = 4, ascq = 1
Jun 6 16:57:57 oscar kernel: ide-tape: ht0: I/O error, pc = 10, key = 3, asc = 30, ascq = 0
Jun 6 16:57:57 oscar kernel: ide-tape: ht0: I/O error, pc = 1e, key = 5, asc = 20, ascq = 0
Jun 6 16:57:57 oscar kernel: ide-tape: ht0: I/O error, pc = 10, key = 3, asc = 30, ascq = 0
Jun 6 16:57:57 oscar kernel: ide-tape: ht0: I/O error, pc = 1e, key = 5, asc = 20, ascq = 0
This is using a ide-tape as a module with a via MP3 chipset and an HP Colorado 20GB
internal drive. Notices some IDE changes when in in ac9...
Ideas?
Ed Tomlinson <tomlins@cam.org>
http://www.cam.org/~tomlins/njpipes.htm
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jun 07 2000 - 21:00:26 EST