Hello,
On Sat, May 27, 2000 at 12:19:31AM +0000, Christopher Zimmerman wrote:
> Overall I've been very pleased with both of these kernels, however,
> all of my test system hang after a while. The only messages I get to
> the console are as follows:
>
> eth0: can't fill rx buffer (force0)!
> eth0: can't fill rx buffer (force0)!
> eth0: can't fill rx buffer (force0)!
> eth0: can't fill rx buffer (force0)!
It's an out-of-memory condition. Your system temporary runs short of memory
and the driver starts to drop packets.
Check you `freepages' settings.
If the "can't fill rx buffer" are printed permanently, it's a pure
configuration problem. If the messages stop but the network doesn't revive,
it may be a problem. Let me know if so, I'll try to debug it.
> eth0: card reports no resoruces
> eth0: card reports no resoruces
> eth0: card reports no resoruces
> eth0: restart the receiver after a possible hang
> eth0: card reports no resoruces
> eth0: card reports no resoruces
> eth0: card reports no resoruces
> eth0: card reports no resoruces
>
> The ethernet card is the eepro100.
Best regards
Andrey V.
Savochkin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed May 31 2000 - 21:00:17 EST