Hello,
On Tue, May 16, 2000 at 02:21:52PM -0700, Kamlesh Bans wrote:
> At the suggestion of Alan Cox (thanks Alan), I tried the 2.2.14 eepro100.c
> (Revision: 1.18 $ 1999/12/29) instead of the 2.2.15 one (Revision: 1.20.2.3
> $ 2000/03/02) with the 2.2.15 kernel, however I am getting the same
> problem. Excerpt from kern.log (still wrong date):
>
> May 8 10:44:30 newton kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
> http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
> May 8 10:44:30 newton kernel: eepro100.c: $Revision: 1.18 $ 1999/12/29
> Modified by Andrey V. Savochkin <saw@msu.ru>
> May 8 10:44:30 newton kernel: eth0: Invalid EEPROM checksum 0x0000, check
> settings before activating this device!
> May 8 10:44:30 newton kernel: eth0: Intel PCI EtherExpress Pro100 at
> 0xc8808000, 00:00:00:00:00:00, IRQ 11.
I've debugged this problem and hope to provide the fix in a day or two.
As a workaround, you may replace eepro_delay macro body by udelay(100).
Best regards
Andrey V.
Savochkin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue May 23 2000 - 21:00:12 EST