On Fri, 12 May 2000, Brian Kress wrote:
> Andre Hedrick wrote:
> >
> > No........It seams that I have the only "BP6 HPT366" that works.....
> >
>
> Do you have anything on the secondary interface for that?
> my HPT366 (BP6) works great with a drive on on the first interface
> (ide4) or the second (ide5). If I put drives on both, it's crash
> city, especially when both are active at once (raid5)
Yes on a different box with an add-on version.
May 1 01:54:29 p6dnf kernel:
HPT366: IDE controller on PCI bus 00 dev 98
HPT366: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xe800-0xe807, BIOS settings: hde:DMA, hdf:pio
HPT366: IDE controller on PCI bus 00 dev 99
HPT366: not 100% native mode: will probe irqs later
ide3: BM-DMA at 0xec00-0xec07, BIOS settings: hdg:DMA, hdh:pio
hde: IBM-DTLA-307075, ATA DISK drive
hdg: Maxtor 54098U8, ATA DISK drive
ide2 at 0xef80-0xef87,0xef8a on irq 18
ide3 at 0xefa0-0xefa7,0xef8e on irq 18
hde: 150136560 sectors (76870 MB) w/1916KiB Cache, CHS=9345/255/63, UDMA(66)
hdg: 80041248 sectors (40981 MB) w/2048KiB Cache, CHS=79406/16/63, UDMA(66)
Andre Hedrick
The Linux ATA/IDE guy
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon May 15 2000 - 21:00:21 EST