>Well, we agree that the bus makes more difference than the processor,
>here screwing around I found that clocking a P233MMX funky can result in
>quite a performance boost. I was running it @ 215Mhz and routed 1 full
>DS3(both ways) and on the second line 100% oneway and 70-80% the other. I
>would bet that if you had a dual bus system you would need less than a PII
>600 to route 4 T3s, but I've never tried it.
Depends on what else is running. Typically you have bgp and a 70K+ routing
table, so that has an impact on horsepower.
Of course most of our customers are doing bandwidth management also, which
is a factor as well.
DB
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Apr 15 2000 - 21:00:25 EST