DMA doesn´t work [kernel 2.2.14]

From: Richard Brunner (richard.brunner@vol.at)
Date: Fri Feb 25 2000 - 12:15:53 EST

Hi!

I have a problem with my new hdd [Seagate Baracuda (ST328040A, 27199MB
w/512kB Cache, CHS=3467/255/63)]!
The DMA mode doesn´t work.

"hdparm -d 1 /dev/hda" to enable it
"hdparm -t /dev/hda" to test it =>

-----------
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: DMA disabled
-----------

DMA works with my second hdd (FUJITSU MPB3043ATU E, 4125MB w/0kB Cache,
CHS=8940/15/63, UDMA).

System:
SuSE 6.3 / Kernel 2.2.14

I hope someone is able to help me :-).

thank you

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

This archive was generated by hypermail 2b29 : Tue Feb 29 2000 - 21:00:13 EST