Hi, all. I've just tried the Ositech "Jack of Spades CardBus" and
the Adaptec "SlimSCSI 1480A CardBus" and they don't work. I've tried
2.3.46 and 2.3.48-pre1. They do work in 2.2.14. I've appended my
kernel messages for 2.3.48-pre1 and the Adaptec. A few days ago I
tried a 3Com 10/100 CardBus card with 2.3.46 and that worked OK.
Regards,
Richard....
Permanent: rgooch@atnf.csiro.au
Current: rgooch@ras.ucalgary.ca
===============================================================================
Linux PCMCIA Card Services 3.1.11
kernel build: 2.3.48 #1 Thu Feb 24 08:27:09 EST 2000
options: [pci] [cardbus] [apm]
Adding cardbus controller 0: PCI device 104c:ac15
PCI: Enabling device 00:04.0 (0000 -> 0002)
Yenta IRQ list 0e98, PCI irq0
Socket status: 30000059
Adding cardbus controller 1: PCI device 104c:ac15
PCI: Enabling device 00:04.1 (0000 -> 0002)
Yenta IRQ list 0e98, PCI irq0
Socket status: 30000006
cs: IO port probe 0x038c-0x03ff: excluding 0x3c4-0x3e3 0x3ec-0x403
cs: IO port probe 0x0230-0x0387: excluding 0x378-0x37f
cs: IO port probe 0x0100-0x021f: clean.
cs: IO port probe 0x1000-0x17ff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:40:33:9A:22:26
**INSERT:
cs: cb_alloc(bus 3): vendor 0x9004, device 0x6075
PCI: Enabling device 03:00.0 (0000 -> 0003)
**REMOVE:
cs: cb_free(bus 3)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Feb 23 2000 - 21:00:34 EST