I have a computer with 7 scsi drives attached to it.
When the driver is loaded, I can see all 7 drives.
sda, sdb, ..., sdf.
Just a bit later the partition checked is happening and only
The first 5 drives are visible ( sda to sde )
I canīt access either sdg or sdf. The device files are there, so the
problem is somewhere else. If I do "fdisk /dev/sdf" I just get
Unable to open /dev/sdf
The kernel is 2.2.14. This is happening on 2 totally different computers.
I havenīt found anything in the documentation, related to maximum of
allowed drives or so...
Anyone an idea??? Help!!!
Something from dmesg:
FDC 0 is an 82078.
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
translucent personality registered
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
raid5: measuring checksumming speed
8regs : 102.870 MB/sec
32regs : 76.200 MB/sec
using fastest function: 8regs (102.870 MB/sec)
(scsi0) <Adaptec AIC-7870 SCSI host adapter> found at PCI 13/0
(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Downloading sequencer code... 406 instructions downloaded
(scsi1) <Adaptec AIC-7870 SCSI host adapter> found at PCI 14/0
(scsi1) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi1) Downloading sequencer code... 406 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.21/3.2.4
<Adaptec AIC-7870 SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.21/3.2.4
<Adaptec AIC-7870 SCSI host adapter>
scsi : 2 hosts.
(scsi0:0:0:0) Synchronous at 10.0 Mbyte/sec, offset 15.
Vendor: IBM OEM Model: 0664M1H Rev: 7 70
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi1:0:5:0) Synchronous at 5.0 Mbyte/sec, offset 15.
Vendor: SONY Model: CD-ROM CDU-76S Rev: 1.0a
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi1, channel 0, id 5, lun 0
scsi : detected 1 SCSI cdrom 1 SCSI disk total.
Uniform CDROM driver Revision: 2.56
SCSI device sda: hdwr sector= 512 bytes. Sectors= 3933040 [1920 MB] [1.9
GB]
Partition check:
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
md.c: sizeof(mdp_super_t) = 4096
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ncr53c8xx: at PCI bus 1, device 15, function 0
ncr53c8xx: 53c875E detected
ncr53c875E-0: rev=0x26, base=0xff9fdc00, io_port=0xf400, irq=3
ncr53c875E-0: ID 7, Fast-20, Parity Checking
ncr53c875E-0: on-chip RAM at 0xff9fc000
ncr53c875E-0: restart (scsi reset).
ncr53c875E-0: Downloading SCSI SCRIPTS.
scsi2 : ncr53c8xx - version 3.2a-2
scsi : 3 hosts.
Vendor: SEAGATE Model: ST34572W Rev: 0784
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi2, channel 0, id 0, lun 0
Vendor: SEAGATE Model: ST15150W Rev: 0017
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdc at scsi2, channel 0, id 1, lun 0
Vendor: SEAGATE Model: ST15150W Rev: 0017
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdd at scsi2, channel 0, id 2, lun 0
Vendor: SEAGATE Model: ST15150W Rev: 0017
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sde at scsi2, channel 0, id 3, lun 0
Vendor: SEAGATE Model: ST15150W Rev: 0017
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdf at scsi2, channel 0, id 4, lun 0
Vendor: SEAGATE Model: ST15150W Rev: 0023
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdg at scsi2, channel 0, id 5, lun 0
ncr53c875E-0-<0,0>: tagged command queue depth set to 4
ncr53c875E-0-<1,0>: tagged command queue depth set to 4
ncr53c875E-0-<2,0>: tagged command queue depth set to 4
ncr53c875E-0-<3,0>: tagged command queue depth set to 4
ncr53c875E-0-<4,0>: tagged command queue depth set to 4
ncr53c875E-0-<5,0>: tagged command queue depth set to 4
ncr53c875E-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 15)
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 8888924 [4340 MB] [4.3
GB]
sdb: unknown partition table
ncr53c875E-0-<1,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 15)
SCSI device sdc: hdwr sector= 512 bytes. Sectors= 8388315 [4095 MB] [4.1
GB]
sdc: unknown partition table
ncr53c875E-0-<2,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 15)
SCSI device sdd: hdwr sector= 512 bytes. Sectors= 8388315 [4095 MB] [4.1
GB]
sdd: unknown partition table
ncr53c875E-0-<3,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 15)
SCSI device sde: hdwr sector= 512 bytes. Sectors= 8388315 [4095 MB] [4.1
GB]
sde: sde1 sde2 sde3
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 36k freed
Adrian
-- adrian@42.fht-esslingen.de http://42.fht-esslingen.de Live for the board. Die for the board.- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Feb 23 2000 - 21:00:27 EST