Linus Torvalds writes:
>
>
> On Thu, 17 Feb 2000, Richard Gooch wrote:
> >
> > Well, at the moment I'm using my other network card with 2.3.46-pre2
> > and it's working:
> >
> > Linux PCMCIA Card Services 3.1.11
> > options: [pci] [cardbus] [apm]
> > Adding cardbus controller 0: PCI device 104c:ac15
> > PCI: Enabling device 00:04.0 (0000 -> 0002)
> > Yenta IRQ list 0e98, PCI irq0
>
> Look, now you still don't have a PCI interrupt, but magically the ISA
> interrupts _do_ show up.
Hm. Yeah.
> > The difference seems to be that this card is 16 bit, whereas the other
> > card is (it had better be!) 32 bit.
>
> Strange. The ISA interrupts should show up regardless of whether a CardBus
> or 16-bit PCMCIA card is inserted.
>
> I wonder if it matters which card you had at bootup? Ie boot up with
> the 16-bit card, and then switch to the 32-bit one..
I've just done that. I had the 16 bit card in there until after the
kernel booted (started init), but before cardmgr ran I swapped and put
in the (supposedly) 32 bit card. It now works! Bit of a kludge,
though.
Regards,
Richard....
Permanent: rgooch@atnf.csiro.au
Current: rgooch@ras.ucalgary.ca
Linux PCMCIA Card Services 3.1.11
options: [pci] [cardbus] [apm]
Adding cardbus controller 0: PCI device 104c:ac15
PCI: Enabling device 00:04.0 (0000 -> 0002)
Yenta IRQ list 0e98, PCI irq0
Socket status: 30000010
Adding cardbus controller 1: PCI device 104c:ac15
PCI: Enabling device 00:04.1 (0000 -> 0002)
Yenta IRQ list 0698, PCI irq0
Socket status: 30000006
[...]
cs: IO port probe 0x038c-0x03ff: excluding 0x3c4-0x3e3 0x3ec-0x403
cs: IO port probe 0x0230-0x0387: excluding 0x378-0x37f
cs: IO port probe 0x0100-0x021f: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)
eth0: autonegotiation failed; using 10mbs
eth0: MII selected
eth0: media 10BaseT, silicon revision 5
eth0: Compaq: port 0x300, irq 3, hwaddr 00:08:C7:64:1D:C4
ttyS03 at port 0x02e8 (irq = 3) is a 16550A
eth0: MII link partner: 0021
eth0: MII selected
eth0: media 10BaseT, silicon revision 5
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Feb 23 2000 - 21:00:17 EST