Hi, all. Ever since kernel 2.3.42 (or thereabouts) PCMCIA hasn't
been working for me, so I've had to drop back to 2.3.36. With the
latest-and-greatest (2.3.46-pre2) kernel I get the following kernel
messages:
=====================
Linux PCMCIA Card Services 3.1.11
kernel build: 2.3.46 #1 Wed Feb 16 07:41:11 EST 2000
options: [pci] [cardbus] [apm]
Intel PCIC probe: not found.
ds: no socket drivers loaded!
=====================
whereas for 2.3.36 I get:
=====================
Linux PCMCIA Card Services 3.1.9
kernel build: 2.3.36 #1 Wed Feb 2 12:41:29 EST 2000
options: [pci] [cardbus] [apm]
PCI routing table version 1.0 at 0xfdf90
Intel PCIC probe: PCI: Enabling device 00:04.0 (0000 -> 0002)
PCI: Assigned IRQ 11 to device 00:04.0 [PIIX-NEW]
PCI: Enabling device 00:04.1 (0000 -> 0002)
PCI: Assigned IRQ 11 to device 00:04.1 [PIIX-NEW]
TI 1131 PCI-to-CardBus at slot 00:04, mem 0x10000000
host opts [0]: [pci + serial irq] [pci irq 11] [lat 168/176] [bus 1/2]
host opts [1]: [pci + serial irq] [pci irq 11] [lat 168/176] [bus 3/4]
ISA irqs (scanned) = 3,4,7,9,10Bad boy: x (at 0xc988706d) called us without a dev_id!
Bad boy: x (at 0xc988706d) called us without a dev_id!
PCI status changes
cs: IO port probe 0x038c-0x03ff: excluding 0x3c4-0x3e3 0x3ec-0x403
cs: IO port probe 0x0230-0x0387: excluding 0x378-0x37f
cs: IO port probe 0x0100-0x021f: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:40:33:9A:22:26
=====================
This is on a Dell Inspiron 3200. Is there some extra setup that I have
to do to get this working? I've installed the latest cardmgr tools
from pcmcia-cs, but that doesn't help.
Regards,
Richard....
Old: rgooch@atnf.csiro.au
Current: rgooch@ras.ucalgary.ca
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Feb 15 2000 - 21:00:30 EST