Hello All, I know this is offtopic & all . But the bloody asus
site doesn't even carry anything like this trouble .
And I'd like a really clueful -bunch- of people to poll this one.
I have set the Freq.'s to things other than 100Mhz . But any
attempt to set the divisor by the switches (yes I set the JEN
jumper to disable) is fruitless . The whole thing that started
this off is the my (brand new) memory appears to -not- be
asus-PC100 compatible . I was getting -really- wierd hangs &
oops & Gosh you name it its happened , including data corruption
to a couple of files I had edited (in /etc/rc.d/ area) .
Below is a 'cat /proc/cpuinfo' & 'dmesg'
Highest stable core Freq. is 83Mhz * 5.5 Divisor = 456.5Mhz
(458 is what dmesg says.)
Has anyone else gotten around this definate -bug- on this MB ?
Any help much appreciated . JimL
+----------------------------------------------------------------+
| James W. Laferriere | System Techniques | Give me VMS |
| Network Engineer | 25416 22nd So | Give me Linux |
| babydr@baby-dragons.com | DesMoines WA 98198 | only on AXP |
+----------------------------------------------------------------+
#cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 458.191083
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx osfxsr kni
bogomips : 457.11
#dmesg
Linux version 2.2.13 (root@dac-test) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Wed Feb 2 20:36:08 PST 2000
Detected 458191083 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 457.11 BogoMIPS
Memory: 257468k/262080k available (1288k kernel code, 420k reserved, 2836k data, 68k init)
CPU: Intel Pentium III (Katmai) stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xf08c0
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IPv4 over IPv4 tunneling driver
early initialization of device tunl0 is deferred
GRE over IPv4 tunneling driver
early initialization of device gre0 is deferred
Starting kswapd v 1.5
parport0: PC-style at 0x378 [SPP,ECP,ECPEPP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven operation.
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
hdb: NEC CD-ROM DRIVE:273, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdb: ATAPI 4X CD-ROM drive, 256kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
DAC960: ***** DAC960 RAID Driver Version 2.2.4 of 23 August 1999 *****
DAC960: Copyright 1998-1999 by Leonard N. Zubkoff <lnz@dandelion.com>
DAC960#0: Configuring Mylex DAC960PD PCI RAID Controller
DAC960#0: Firmware Version: 3.51-0-04, Channels: 3, Memory Size: 32MB
DAC960#0: PCI Bus: 0, Device: 10, Function: 0, I/O Address: 0xD000
DAC960#0: PCI Address: 0xE0000000 mapped at 0xD0000000, IRQ Channel: 5
DAC960#0: Controller Queue Depth: 64, Maximum Blocks per Command: 128
DAC960#0: Driver Queue Depth: 63, Maximum Scatter/Gather Segments: 17
DAC960#0: Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63
DAC960#0: Physical Devices:
DAC960#0: Logical Drives:
sym53c8xx: at PCI bus 0, device 11, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c810a detected
sym53c810a-0: rev=0x12, base=0xdf800000, io_port=0xb800, irq=10
sym53c810a-0: ID 7, Fast-10, Parity Checking
sym53c810a-0: restart (scsi reset).
scsi0 : sym53c8xx - version 1.3g
scsi : 1 host.
sym53c810a-0-<0,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
Vendor: COMPAQ Model: ST34371W Rev: 0940
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
sym53c810a-0-<0,0>: tagged command queue depth set to 4
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8386000 [4094 MB] [4.1 GB]
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: Intel EtherExpress Pro 10/100 at 0xb400, 00:A0:C9:86:A7:53, IRQ 9.
Board assembly 678400-001, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0x49caa8d6).
Receiver lock-up workaround activated.
Partition check:
sda: sda1 sda2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 68k freed
Adding Swap: 136512k swap-space (priority -1)
DAC960#0: Physical Drive 0:1 killed because of selection timeout
DAC960#0: Physical Drive 0:2 killed because of selection timeout
DAC960#0: Physical Drive 0:3 killed because of selection timeout
DAC960#0: Physical Drive 0:4 killed because of selection timeout
DAC960#0: Physical Drive 0:5 killed because of selection timeout
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Feb 07 2000 - 21:00:10 EST