Hi,
since about 2.3.36 the NCR scsi controller wasn't detected correctly on my
Alpha
machine:
> scsi-ncr53c7,8xx : at PCI bus 0, device 6, function 0
> scsi-ncr53c7,8xx : disabling I/O mapping since base address 0 (0x8000)
> bits 0..1 indicate a non-IO mapping
> scsi-ncr53c7,8xx : NCR53c810 at memory 0x2200000, io 0x0, irq 11
> scsi0 : not initializing, no I/O or memory mapping known
> scsi : 0 hosts.
> scsi : detected total.
I fixed it (by looking at ncr53c8xx.c how it's done there).
regards,
chris
(See attached file: 53c7,8xx-patch.gz)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Feb 07 2000 - 21:00:06 EST