Re: Devices not supporting read-6....

From: Gerd Knorr (kraxel@goldbach.in-berlin.de)
Date: Sat Jan 22 2000 - 04:27:52 EST


> > As far as I know, "read-6" is a very mandatory command. However
> > there is a device, the
> >
> > {"TOSHIBA","DVD-RAM SD-W1101","*", BLIST_GHOST},
>
> The MMC specs does not tell about READ(6) being mandatory (assuming the
> device model is that one).

My old SCSI-II draft (1993...) says both READ(6) and READ(10) are
mandatory for direct access media (i.e. hard disks). For CD-ROM drives
READ(6) is optional and READ(10) is mandatory. Removing all READ(6) code
from sr.c should'nt break anything.

So the only device where you have to use READ(6) are probably pre-scsi2
harddisks (which havn't enouth space for a current unpacked kernel source
tree...)

  Gerd

-- 
Protecting the children is a good way to get a lot of adults who cant
stand up for themselves.		-- seen in some sig on /.

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Jan 23 2000 - 21:00:27 EST