Kernel v2.2.15pre3 SCSI 2940U2W with AIC7895 boot still broke.

From: M Sweger (mikesw@whiterose.net)
Date: Tue Jan 18 2000 - 14:22:45 EST


Hi,

   I'm trying to upgrade my linux kernel from v2.2.13 to v2.2.14 and I've
also applied pre-patch-2.2.15-3 from Alan Cox and running into boot
problems finishing the SCSI Channel B iinstruction download sequence.

I've included all the information that I can provide and can't go any
further. The information includes: PC h/w, current s/w configuration, the
problems being encountered during upgrade along with what was tried.
See item (A,B) for general information and see item (C) for the problem I'm
having.

A). My PC hardware Configuration
     DELL Optiplex Gx1 333mhz Intel processor
     128 Megs of RAM
     1 GIG IDE QUANTUM drive
     9 GIG SCSI Western Digital on an Adaptec 2940U2W AIC 7895
     3com 3c59x ethercard

B). My current s/w and OS configurations:

    setup #1 (old):

     The 1Gig IDE drive contains MSDOS v6.22 and Linux v2.0.38 UMSDOS Filsys.

      The 9Gig SCSI drive contains NT4.0 on partition two, MSDOS v6.22 on
      partitions one,three and four. Linux v2.2.13/14 UMSDOS Filesys is running
      on partition three which is a 2Gig partition.
            - this version of linux doesn't have Xwindows or netscape
            - this version of linux does have vgalibs, slang and glib
            - no swap space activated.

      setup #2 (new kernel):

      Linux v2.2.13 UMSDOS kernel is booting and running with
                    (mnalis) s/w patch for pipe problem which caused init
                    to crash on boot:

                Linux S/W installed:

                S/W pkgs compiled agains't Linux v2.2.1 and installed.
                        -- binutils-2.9.1.0.24.tar.gz
                        -- bin86_0.13.0-4.deb
                        -- util-linux-2.9i.tar.gz
                        -- netkit v0.15 tarballs dated October 1999
                        -- update v2.11.tar.gz
                        -- egcs v2.95.2.tar.gz

                S/W pkgs pre-compiled and installed are:
                        --installed libc6-dev_2.0.7t-1.deb precompiled binary
                        --installed egcs-1.0.3-glibc.x86.tar.bz2 precompile bin

                All other s/w pkgs were compiled agains't linux kernel v2.2.1
                using the above s/w pkgs to establish a baseline system.

     Summary Info.........

-- Versions installed: (if some fields are empty or looks
-- unusual then possibly you have very old versions)
Linux DosLinux 2.2.1 #1 SMP Mon Nov 8 16:47:42 /etc/localtime 1999 i686 unknown
Kernel modules 2.1.121
Gnu C 2.95.2
Binutils 2.9.1.0.24
Linux C Library 2.0.7
Dynamic linker ldd: version 1.9.10
Linux C++ Library 2.8.1
Procps 2.0.2
Mount 2.9i
Net-tools 1.50
Console-tools 0.3.0
Sh-utils 1.16
Modules Loaded loop 3c59x

C). PROBLEM: Compiled the full Linux v2.2.14 tarball using
                libc6 v2.0.7pre6 and for the following two gcc compilers
                 egcs v1.0.3 and gcc v2.95.2 and with linux v2.2.15pre3
                patch.

                The kernel compiled without problem when using either
                gcc compiler version. However, when I tried to boot
                the kernel using "loadlin v1.6a" for either of these
                compilers, the kernel didn't finish booting and it hanged
                trying to finish detection of the Adaptec 2940U2W AIC 7895
                adapter card which has SCSI BIOS v1.33S2. Linux kernel
                v2.2.13 was compiled using both these compilers and had
                no problem.

                Here is the sequence during boot and detection of the
                Adaptec SCSI card in abbreviated form.

                (scsi0) ....found PCI 14/0
                (scsi0) ... Wide Channel A SCSI id=7
                (scsi0) ... detected auto termination 32/255 SCBS
                (scsi0) ... cables (Int-50=NO, Int-68=Yes, Ext-68=NO)
                (scsi0) ... 374 instructions downloaded.

                (scsi1) ... found PCI 14/1
                (scsi1) ... Narrow Channel B SCSI id=7
                (scsi1) .... detected auto termination 32/255 SCBS
                (scsi1) ... cables (Int-50=NO, Ext-50=NO)

******* IT HANGS HERE FOREVER******
******* It never download another 374 instructions nor prints the
          version number 5.1.11 on both channels.
         It never detects the Western Digital SCSI drive on Channel A.
         It never mounts the root filesystem and finishes the boot.
          NOTE: There is only one SCSI drive/device in the system. The
                rest are IDE (Harddrive and CDROM)
     

NOTENOTE: This is exactly the same problem I had when I upgraded from
            Linux kernel v2.0.34 to v2.0.38. Linux v2.0.34 boots off the
            IDE drive and detects and mounts the SCSI devices.

            For this case the Linux kernel v2.2.13 boots off the SCSI and
            detects and mounts the IDE devices; but when v2.2.14 with
            v2.2.15pre3 is booted it hangs as listed above.

D). Linux v2.2.14 with v2.2.15pre3 patch Kernel Configuration I used.

#
# Automatically generated by make menuconfig: don't edit
#

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M586TSC is not set
# CONFIG_M686 is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_1GB=y
# CONFIG_2GB is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
CONFIG_SMP=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
# CONFIG_KMOD is not set

#
# General setup
#
CONFIG_NET=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_OPTIMIZE is not set
CONFIG_PCI_OLD_PROC=y
# CONFIG_MCA is not set
# CONFIG_VISWS is not set
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_BINFMT_JAVA is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_OTHER is not set
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_POWER_OFF=y
# CONFIG_APM_IGNORE_MULTIPLE_SUSPEND is not set
CONFIG_APM_IGNORE_SUSPEND_BOUNCE=y
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_VIA82C586 is not set
# CONFIG_BLK_DEV_CMD646 is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_STRIPED=y
CONFIG_MD_MIRRORING=y
CONFIG_MD_RAID5=y
# CONFIG_MD_BOOT is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_PARIDE_PARPORT=y
CONFIG_PARIDE=m
# CONFIG_PARIDE_PD is not set
# CONFIG_PARIDE_PCD is not set
# CONFIG_PARIDE_PF is not set
# CONFIG_PARIDE_PT is not set
# CONFIG_PARIDE_PG is not set
# CONFIG_PARIDE_ATEN is not set
# CONFIG_PARIDE_BPCK is not set
# CONFIG_PARIDE_COMM is not set
# CONFIG_PARIDE_DSTR is not set
# CONFIG_PARIDE_FIT2 is not set
# CONFIG_PARIDE_FIT3 is not set
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
# CONFIG_PARIDE_KBIC is not set
# CONFIG_PARIDE_KTTI is not set
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_DEV_HD is not set

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
# CONFIG_NETLINK_DEV is not set
CONFIG_FIREWALL=y
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_IP_FIREWALL is not set
# CONFIG_IP_ROUTER is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_IP_ALIAS=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_RARP is not set
CONFIG_SKB_LARGE=y
# CONFIG_IPV6 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_BRIDGE is not set
# CONFIG_LLC is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
# CONFIG_CPU_IS_SLOW is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set

#
# SCSI support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
CONFIG_SCSI_AIC7XXX=y
# CONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT is not set
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
# CONFIG_AIC7XXX_PROC_STATS is not set
CONFIG_AIC7XXX_RESET_DELAY=5
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
CONFIG_SCSI_IZIP_EPP16=y
CONFIG_SCSI_IZIP_SLOW_CTR=y
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_SYM53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_DEBUG is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_RTL8139 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_EISA=y
# CONFIG_PCNET32 is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_DM9102 is not set
# CONFIG_DE4X5 is not set
# CONFIG_DEC_ELCP is not set
# CONFIG_DEC_ELCP_OLD is not set
# CONFIG_DGRS is not set
CONFIG_EEXPRESS_PRO100=y
# CONFIG_LNE390 is not set
# CONFIG_NE3210 is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SIS900 is not set
# CONFIG_ES3210 is not set
# CONFIG_EPIC100 is not set
# CONFIG_ZNET is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_RADIO is not set

#
# Token ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_HOSTESS_SV11 is not set
# CONFIG_COSA is not set
# CONFIG_SEALEVEL_4021 is not set
# CONFIG_COMX is not set
# CONFIG_DLCI is not set
# CONFIG_SBNI is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA subsystem support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_UNIX98_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_PRINTER_READBACK is not set
CONFIG_MOUSE=y

#
# Mice
#
# CONFIG_ATIXL_BUSMOUSE is not set
# CONFIG_BUSMOUSE is not set
# CONFIG_MS_BUSMOUSE is not set
CONFIG_PSMOUSE=y
CONFIG_82C710_MOUSE=y
# CONFIG_PC110_PAD is not set

#
# Joysticks
#
# CONFIG_JOYSTICK is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y

#
# Video For Linux
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DTLK is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set

#
# Filesystems
#
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_UMSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_MINIX_FS=y
# CONFIG_NTFS_FS is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_EFS_FS is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=m
# CONFIG_NFSD is not set
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set

#
# Partition Types
#
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_SMD_DISKLABEL is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VIDEO_SELECT is not set
# CONFIG_MDA_CONSOLE is not set
# CONFIG_FB is not set

#
# Sound
#
CONFIG_SOUND=m
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_PAS is not set
# CONFIG_SOUND_SB is not set
# CONFIG_SOUND_GUS is not set
# CONFIG_SOUND_MPU401 is not set
# CONFIG_SOUND_PSS is not set
# CONFIG_SOUND_MSS is not set
# CONFIG_SOUND_SSCAPE is not set
# CONFIG_SOUND_TRIX is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_SOUND_MAD16 is not set
# CONFIG_SOUND_WAVEFRONT is not set
CONFIG_SOUND_CS4232=m
# CONFIG_SOUND_OPL3SA2 is not set
# CONFIG_SOUND_MAUI is not set
# CONFIG_SOUND_SGALAXY is not set
# CONFIG_SOUND_AD1816 is not set
# CONFIG_SOUND_OPL3SA1 is not set
# CONFIG_SOUND_SOFTOSS is not set
CONFIG_SOUND_YM3812=m
# CONFIG_SOUND_VMIDI is not set
# CONFIG_SOUND_UART6850 is not set
# CONFIG_SOUND_NM256 is not set

#
# Additional low level sound drivers
#
# CONFIG_LOWLEVEL_SOUND is not set

#
# Kernel hacking
#
# CONFIG_MAGIC_SYSRQ is not set
         

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Jan 23 2000 - 21:00:18 EST