[PATCH net] dpll: zl3073x: Fix ref frequency setting

[Ivan Vecera]

The frequency for an input reference is computed as:

  frequency = freq_base * freq_mult * freq_ratio_m / freq_ratio_n

Before commit 5bc02b190a3fb ("dpll: zl3073x: Cache all reference
properties in zl3073x_ref"), zl3073x_dpll_input_pin_frequency_set()
explicitly wrote 1 to both the REF_RATIO_M and REF_RATIO_N hardware
registers whenever a new frequency was set. This ensured the FEC ratio
was always reset to 1:1 alongside the new base/multiplier values.

The refactoring in that commit introduced zl3073x_ref_freq_set() to
update the cached ref state, but this helper only sets freq_base and
freq_mult without resetting freq_ratio_m and freq_ratio_n to 1. Because
zl3073x_ref_state_set() uses a compare-and-write strategy, unchanged
ratio fields are never written to the hardware. If the device previously
had non-unity FEC ratio values, they remain in effect after a frequency
change, resulting in an incorrect computed frequency.

Explicitly set freq_ratio_m and freq_ratio_n to 1 in zl3073x_ref_freq_set()
to restore the original behavior.

Fixes: 5bc02b190a3fb ("dpll: zl3073x: Cache all reference properties in zl3073x_ref")
Signed-off-by: Ivan Vecera <ivecera@xxxxxxxxxx>
---
 drivers/dpll/zl3073x/ref.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dpll/zl3073x/ref.h b/drivers/dpll/zl3073x/ref.h
index efc7f59cd9f9..0d8618f5ce8d 100644
--- a/drivers/dpll/zl3073x/ref.h
+++ b/drivers/dpll/zl3073x/ref.h
@@ -91,6 +91,8 @@ zl3073x_ref_freq_set(struct zl3073x_ref *ref, u32 freq)
 
 	ref->freq_base = base;
 	ref->freq_mult = mult;
+	ref->freq_ratio_m = 1;
+	ref->freq_ratio_n = 1;
 
 	return 0;
 }
-- 
2.52.0