[PATCH v2 0/2] ARM: BCM5301X: Add support for Buffalo WXR-1750DHP

[Taishi Shimizu]

This patch series adds support for the Buffalo WXR-1750DHP router,
based on the Broadcom BCM4708 SoC.

Patch 1 updates the device tree bindings documentation to list
Buffalo WXR-1750DHP as a supported board under BCM4708.

Patch 2 introduces a device tree source file for the router.

Changes since v1:
 - remove `chosen` node and `bootargs` (inherited from bcm4708.dtsi)
 - replace `label` in LEDs with `color` and `function` properties
 - change USB LED to use `LED_FUNCTION_USB` and added `trigger-sources`
 - reorder GPIOs and clean up button node formatting

Taishi Shimizu (2):
  dt-bindings: arm: bcm: Add support for Buffalo WXR-1750DHP
  ARM: dts: BCM5301X: Add support for Buffalo WXR-1750DHP

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> # for patch 1

 .../bindings/arm/bcm/brcm,bcm4708.yaml        |   1 +
 arch/arm/boot/dts/broadcom/Makefile           |   1 +
 .../broadcom/bcm4708-buffalo-wxr-1750dhp.dts  | 138 ++++++++++++++++++
 3 files changed, 140 insertions(+)
 create mode 100644 arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts


base-commit: 379f604cc3dc2c865dc2b13d81faa166b6df59ec
-- 
2.43.0