[PATCH 04/19] gpio: wcove: use new GPIO line value setter callbacks

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
 drivers/gpio/gpio-wcove.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpio/gpio-wcove.c b/drivers/gpio/gpio-wcove.c
index 1ec24f6f9300f33f5b3f0f8deb539e08392b8188..c50b74ced6364e3c3cfbe9ed385d21c80a2bb2e7 100644
--- a/drivers/gpio/gpio-wcove.c
+++ b/drivers/gpio/gpio-wcove.c
@@ -200,18 +200,18 @@ static int wcove_gpio_get(struct gpio_chip *chip, unsigned int gpio)
 	return val & 0x1;
 }
 
-static void wcove_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
+static int wcove_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
 {
 	struct wcove_gpio *wg = gpiochip_get_data(chip);
 	int reg = to_reg(gpio, CTRL_OUT);
 
 	if (reg < 0)
-		return;
+		return 0;
 
 	if (value)
-		regmap_set_bits(wg->regmap, reg, 1);
-	else
-		regmap_clear_bits(wg->regmap, reg, 1);
+		return regmap_set_bits(wg->regmap, reg, 1);
+
+	return regmap_clear_bits(wg->regmap, reg, 1);
 }
 
 static int wcove_gpio_set_config(struct gpio_chip *chip, unsigned int gpio,
@@ -442,7 +442,7 @@ static int wcove_gpio_probe(struct platform_device *pdev)
 	wg->chip.direction_output = wcove_gpio_dir_out;
 	wg->chip.get_direction = wcove_gpio_get_direction;
 	wg->chip.get = wcove_gpio_get;
-	wg->chip.set = wcove_gpio_set;
+	wg->chip.set_rv = wcove_gpio_set;
 	wg->chip.set_config = wcove_gpio_set_config;
 	wg->chip.base = -1;
 	wg->chip.ngpio = WCOVE_VGPIO_NUM;

-- 
2.48.1