[PATCH 02/19] gpio: wcd934x: check the return value of regmap_update_bits()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

regmap_update_bits() can fail so check its return value in
wcd_gpio_direction_output() for consistency with the rest of the code
and propagate any errors.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
 drivers/gpio/gpio-wcd934x.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-wcd934x.c b/drivers/gpio/gpio-wcd934x.c
index 2bba27b13947f14459c32db4812f6451eddbbfe4..cfa7b0a50c8e339603bc5fc70a8d7354f3bc6486 100644
--- a/drivers/gpio/gpio-wcd934x.c
+++ b/drivers/gpio/gpio-wcd934x.c
@@ -46,9 +46,12 @@ static int wcd_gpio_direction_output(struct gpio_chip *chip, unsigned int pin,
 				     int val)
 {
 	struct wcd_gpio_data *data = gpiochip_get_data(chip);
+	int ret;
 
-	regmap_update_bits(data->map, WCD_REG_DIR_CTL_OFFSET,
-			   WCD_PIN_MASK(pin), WCD_PIN_MASK(pin));
+	ret = regmap_update_bits(data->map, WCD_REG_DIR_CTL_OFFSET,
+				 WCD_PIN_MASK(pin), WCD_PIN_MASK(pin));
+	if (ret)
+		return ret;
 
 	return regmap_update_bits(data->map, WCD_REG_VAL_CTL_OFFSET,
 				  WCD_PIN_MASK(pin),

-- 
2.48.1