Re: [PATCH v3 5/5] phy: qcom: qmp-pcie: add x1e80100 qref supplies

[Johan Hovold]

On Thu, May 08, 2025 at 04:50:30PM +0800, Qiang Yu wrote:
> 
> On 5/8/2025 4:20 PM, Johan Hovold wrote:
> > On Thu, May 08, 2025 at 04:15:14PM +0800, Wenbin Yao wrote:
> >> From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
> >>
> >> All PCIe PHYs on the X1E80100 SOC require the vdda-qref, which feeds QREF
> >> clocks provided by the TCSR device.
> > This still looks wrong and you never replied to why these supplies
> > shouldn't be handled by the tcsr clock driver that supplies these
> > clocks:
> >
> > 	https://lore.kernel.org/lkml/aBHUmXx6N72_sCH9@xxxxxxxxxxxxxxxxxxxx/

> Sorry, I thought Konrad had convinced you.

IIRC, he just said you guys were told to add the QREF supply to the PHY.
That's not an argument.

> If the TCSR driver manages these supplies, would it be possible for tscr
> driver to recognize when it needs to turn vdda-qref on or off for a
> specific PCIe port?

Sure, just add a lookup table to the driver and enable the required
supplies when a ref clock is enabled.

As I mentioned in the other thread, the T14s has the following QREF
supplies:

	
	VDD_A_QREFS_1P2_A
	VDD_A_QREFS_1P2_B

	VDD_A_QREFS_0P875_A
	VDD_A_QREFS_0P875_B
	VDD_A_QREFS_0P875_0
	VDD_A_QREFS_0P875_2
	VDD_A_QREFS_0P875_3

and it's not clear how these maps to the various consumer ref clocks,
including the PCIe ones:

	#define TCSR_PCIE_2L_4_CLKREF_EN
	#define TCSR_PCIE_2L_5_CLKREF_EN
	#define TCSR_PCIE_8L_CLKREF_EN
	#define TCSR_PCIE_4L_CLKREF_EN

That mapping can be done by the TCSR clock driver (which would also take
care of the 1.2 V supplies).

Johan