diff -Naur old/Documentation/scsi/ChangeLog.megaraid new/Documentation/scsi/ChangeLog.megaraid
--- old/Documentation/scsi/ChangeLog.megaraid	2005-05-16 11:19:15.142120760 -0400
+++ new/Documentation/scsi/ChangeLog.megaraid	2005-05-16 11:20:11.654529568 -0400
@@ -1,3 +1,69 @@
+Release Date	: Mon Mar 07 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
+Current Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
+Older Version	: 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
+
+1.	Added IOCTL backward compatibility.
+	Convert megaraid_mm driver to new compat_ioctl entry points.
+	I don't have easy access to hardware, so only compile tested.
+		- Signed-off-by:Andi Kleen <ak@muc.de>
+
+2.	megaraid_mbox fix: wrong order of arguments in memset()
+	That, BTW, shows why cross-builds are useful-the only indication of
+	problem had been a new warning showing up in sparse output on alpha
+	build (number of exceeding 256 got truncated).
+		- Signed-off-by: Al Viro
+		<viro@parcelfarce.linux.theplanet.co.uk>
+
+3.	Convert pci_module_init to pci_register_driver
+	Convert from pci_module_init to pci_register_driver
+	(from:http://kerneljanitors.org/TODO)
+		- Signed-off-by: Domen Puncer <domen@coderock.org>
+
+4.	Use the pre defined DMA mask constants from dma-mapping.h
+	Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling
+	pci_set_dma_mask() or pci_set_consistend_dma_mask(). See
+	http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for more
+	details.
+		Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
+		Signed-off-by: Domen Puncer <domen@coderock.org>
+
+5.	Remove SSID checking for Dobson, Lindsay, and Verde based products.
+	Checking the SSVID/SSID for controllers which have Dobson, Lindsay,
+	and Verde is unnecessary because device ID has been assigned by LSI
+	and it is unique value. So, all controllers with these IOPs have to be
+	supported by the driver regardless SSVID/SSID.
+
+6.	Date Thu, 27 Jan 2005 04:31:09 +0100 
+	From Herbert Poetzl <> 
+	Subject RFC: assert_spin_locked() for 2.6 
+
+	Greetings!
+
+	overcautious programming will kill your kernel ;)
+	ever thought about checking a spin_lock or even
+	asserting that it must be held (maybe just for
+	spinlock debugging?) ...
+
+	there are several checks present in the kernel
+	where somebody does a variation on the following:
+
+	  BUG_ON(!spin_is_locked(&some_lock));
+
+	so what's wrong about that? nothing, unless you
+	compile the code with CONFIG_DEBUG_SPINLOCK but 
+	without CONFIG_SMP ... in which case the BUG()
+	will kill your kernel ...
+
+	maybe it's not advised to make such assertions, 
+	but here is a solution which works for me ...
+	(compile tested for sh, x86_64 and x86, boot/run
+	tested for x86 only)
+
+	best,
+	Herbert
+
+		- Herbert Poetzl <herbert@13thfloor.at>, Thu, 27 Jan 2005
+
 Release Date	: Thu Feb 03 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
 Current Version	: 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
 Older Version	: 2.20.4.4 (scsi module), 2.20.2.4 (cmm module)
diff -Naur old/drivers/scsi/megaraid/mega_common.h new/drivers/scsi/megaraid/mega_common.h
--- old/drivers/scsi/megaraid/mega_common.h	2005-05-16 11:19:54.619119344 -0400
+++ new/drivers/scsi/megaraid/mega_common.h	2005-05-16 11:20:11.650530176 -0400
@@ -27,6 +27,7 @@
 #include <linux/list.h>
 #include <linux/version.h>
 #include <linux/moduleparam.h>
+#include <linux/dma-mapping.h>
 #include <asm/semaphore.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
diff -Naur old/drivers/scsi/megaraid/megaraid_mbox.c new/drivers/scsi/megaraid/megaraid_mbox.c
--- old/drivers/scsi/megaraid/megaraid_mbox.c	2005-05-16 11:19:54.620119192 -0400
+++ new/drivers/scsi/megaraid/megaraid_mbox.c	2005-05-16 11:20:11.642531392 -0400
@@ -10,7 +10,7 @@
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: megaraid_mbox.c
- * Version	: v2.20.4.5 (Feb 03 2005)
+ * Version	: v2.20.4.6 (Mar 07 2005)
  *
  * Authors:
  * 	Atul Mukker		<Atul.Mukker@lsil.com>
@@ -202,7 +202,7 @@
  * ### global data ###
  */
 static uint8_t megaraid_mbox_version[8] =
-	{ 0x02, 0x20, 0x04, 0x05, 2, 3, 20, 5 };
+	{ 0x02, 0x20, 0x04, 0x06, 3, 7, 20, 5 };
 
 
 /*
@@ -229,9 +229,9 @@
 	},
 	{
 		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_PERC4_QC,
-		PCI_VENDOR_ID_DELL,
-		PCI_SUBSYS_ID_PERC4_QC,
+		PCI_DEVICE_ID_VERDE,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
 	},
 	{
 		PCI_VENDOR_ID_DELL,
@@ -271,15 +271,9 @@
 	},
 	{
 		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_PERC4E_DC_320_2E,
-		PCI_VENDOR_ID_DELL,
-		PCI_SUBSYS_ID_PERC4E_DC_320_2E,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_PERC4E_SC_320_1E,
-		PCI_VENDOR_ID_DELL,
-		PCI_SUBSYS_ID_PERC4E_SC_320_1E,
+		PCI_DEVICE_ID_DOBSON,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
 	},
 	{
 		PCI_VENDOR_ID_AMI,
@@ -331,36 +325,6 @@
 	},
 	{
 		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_SCSI_320_0x,
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_SUBSYS_ID_MEGARAID_SCSI_320_0x,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_SCSI_320_2x,
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_SUBSYS_ID_MEGARAID_SCSI_320_2x,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_SCSI_320_4x,
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_SUBSYS_ID_MEGARAID_SCSI_320_4x,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_SCSI_320_1E,
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_SUBSYS_ID_MEGARAID_SCSI_320_1E,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_SCSI_320_2E,
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_SUBSYS_ID_MEGARAID_SCSI_320_2E,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
 		PCI_DEVICE_ID_MEGARAID_I4_133_RAID,
 		PCI_VENDOR_ID_LSI_LOGIC,
 		PCI_SUBSYS_ID_MEGARAID_I4_133_RAID,
@@ -379,21 +343,9 @@
 	},
 	{
 		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_SATA_300_4x,
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_SUBSYS_ID_MEGARAID_SATA_300_4x,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_SATA_300_8x,
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_SUBSYS_ID_MEGARAID_SATA_300_8x,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_INTEL_RAID_SRCU42X,
-		PCI_VENDOR_ID_INTEL,
-		PCI_SUBSYS_ID_INTEL_RAID_SRCU42X,
+		PCI_DEVICE_ID_LINDSAY,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
 	},
 	{
 		PCI_VENDOR_ID_LSI_LOGIC,
@@ -403,58 +355,10 @@
 	},
 	{
 		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_INTEL_RAID_SRCU42E,
-		PCI_VENDOR_ID_INTEL,
-		PCI_SUBSYS_ID_INTEL_RAID_SRCU42E,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_INTEL_RAID_SRCZCRX,
-		PCI_VENDOR_ID_INTEL,
-		PCI_SUBSYS_ID_INTEL_RAID_SRCZCRX,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_INTEL_RAID_SRCS28X,
-		PCI_VENDOR_ID_INTEL,
-		PCI_SUBSYS_ID_INTEL_RAID_SRCS28X,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_INTEL_RAID_SROMBU42E_ALIEF,
-		PCI_VENDOR_ID_INTEL,
-		PCI_SUBSYS_ID_INTEL_RAID_SROMBU42E_ALIEF,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_INTEL_RAID_SROMBU42E_HARWICH,
-		PCI_VENDOR_ID_INTEL,
-		PCI_SUBSYS_ID_INTEL_RAID_SROMBU42E_HARWICH,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
 		PCI_DEVICE_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK,
 		PCI_VENDOR_ID_INTEL,
 		PCI_SUBSYS_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK,
 	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_FSC_MEGARAID_PCI_EXPRESS_ROMB,
-		PCI_SUBSYS_ID_FSC,
-		PCI_SUBSYS_ID_FSC_MEGARAID_PCI_EXPRESS_ROMB,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_ACER_ROMB_2E,
-		PCI_VENDOR_ID_AI,
-		PCI_SUBSYS_ID_MEGARAID_ACER_ROMB_2E,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_NEC_ROMB_2E,
-		PCI_VENDOR_ID_NEC,
-		PCI_SUBSYS_ID_MEGARAID_NEC_ROMB_2E,
-	},
 	{0}	/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(pci, pci_id_table_g);
@@ -539,7 +443,8 @@
 
 
 	// register as a PCI hot-plug driver module
-	if ((rval = pci_module_init(&megaraid_pci_driver_g))) {
+	rval = pci_register_driver(&megaraid_pci_driver_g);
+	if (rval < 0) {
 		con_log(CL_ANN, (KERN_WARNING
 			"megaraid: could not register hotplug support.\n"));
 	}
@@ -619,7 +524,7 @@
 
 	// Setup the default DMA mask. This would be changed later on
 	// depending on hardware capabilities
-	if (pci_set_dma_mask(adapter->pdev, 0xFFFFFFFF) != 0) {
+	if (pci_set_dma_mask(adapter->pdev, DMA_32BIT_MASK) != 0) {
 
 		con_log(CL_ANN, (KERN_WARNING
 			"megaraid: pci_set_dma_mask failed:%d\n", __LINE__));
@@ -1031,7 +936,7 @@
 
 	// Set the DMA mask to 64-bit. All supported controllers as capable of
 	// DMA in this range
-	if (pci_set_dma_mask(adapter->pdev, 0xFFFFFFFFFFFFFFFFULL) != 0) {
+	if (pci_set_dma_mask(adapter->pdev, DMA_64BIT_MASK) != 0) {
 
 		con_log(CL_ANN, (KERN_WARNING
 			"megaraid: could not set DMA mask for 64-bit.\n"));
diff -Naur old/drivers/scsi/megaraid/megaraid_mbox.h new/drivers/scsi/megaraid/megaraid_mbox.h
--- old/drivers/scsi/megaraid/megaraid_mbox.h	2005-05-16 11:19:54.620119192 -0400
+++ new/drivers/scsi/megaraid/megaraid_mbox.h	2005-05-16 11:20:11.643531240 -0400
@@ -21,8 +21,8 @@
 #include "megaraid_ioctl.h"
 
 
-#define MEGARAID_VERSION	"2.20.4.5"
-#define MEGARAID_EXT_VERSION	"(Release Date: Thu Feb 03 12:27:22 EST 2005)"
+#define MEGARAID_VERSION	"2.20.4.6"
+#define MEGARAID_EXT_VERSION	"(Release Date: Mon Mar 07 12:27:22 EST 2005)"
 
 
 /*
@@ -37,8 +37,7 @@
 #define PCI_DEVICE_ID_PERC4_DC				0x1960
 #define PCI_SUBSYS_ID_PERC4_DC				0x0518
 
-#define PCI_DEVICE_ID_PERC4_QC				0x0407
-#define PCI_SUBSYS_ID_PERC4_QC				0x0531
+#define PCI_DEVICE_ID_VERDE				0x0407
 
 #define PCI_DEVICE_ID_PERC4_DI_EVERGLADES		0x000F
 #define PCI_SUBSYS_ID_PERC4_DI_EVERGLADES		0x014A
@@ -58,11 +57,7 @@
 #define PCI_DEVICE_ID_PERC4E_DI_GUADALUPE		0x0013
 #define PCI_SUBSYS_ID_PERC4E_DI_GUADALUPE		0x0170
 
-#define PCI_DEVICE_ID_PERC4E_DC_320_2E			0x0408
-#define PCI_SUBSYS_ID_PERC4E_DC_320_2E			0x0002
-
-#define PCI_DEVICE_ID_PERC4E_SC_320_1E			0x0408
-#define PCI_SUBSYS_ID_PERC4E_SC_320_1E			0x0001
+#define PCI_DEVICE_ID_DOBSON				0x0408
 
 #define PCI_DEVICE_ID_MEGARAID_SCSI_320_0		0x1960
 #define PCI_SUBSYS_ID_MEGARAID_SCSI_320_0		0xA520
@@ -73,21 +68,6 @@
 #define PCI_DEVICE_ID_MEGARAID_SCSI_320_2		0x1960
 #define PCI_SUBSYS_ID_MEGARAID_SCSI_320_2		0x0518
 
-#define PCI_DEVICE_ID_MEGARAID_SCSI_320_0x		0x0407
-#define PCI_SUBSYS_ID_MEGARAID_SCSI_320_0x		0x0530
-
-#define PCI_DEVICE_ID_MEGARAID_SCSI_320_2x		0x0407
-#define PCI_SUBSYS_ID_MEGARAID_SCSI_320_2x		0x0532
-
-#define PCI_DEVICE_ID_MEGARAID_SCSI_320_4x		0x0407
-#define PCI_SUBSYS_ID_MEGARAID_SCSI_320_4x		0x0531
-
-#define PCI_DEVICE_ID_MEGARAID_SCSI_320_1E		0x0408
-#define PCI_SUBSYS_ID_MEGARAID_SCSI_320_1E		0x0001
-
-#define PCI_DEVICE_ID_MEGARAID_SCSI_320_2E		0x0408
-#define PCI_SUBSYS_ID_MEGARAID_SCSI_320_2E		0x0002
-
 #define PCI_DEVICE_ID_MEGARAID_I4_133_RAID		0x1960
 #define PCI_SUBSYS_ID_MEGARAID_I4_133_RAID		0x0522
 
@@ -97,52 +77,18 @@
 #define PCI_DEVICE_ID_MEGARAID_SATA_150_6		0x1960
 #define PCI_SUBSYS_ID_MEGARAID_SATA_150_6		0x0523
 
-#define PCI_DEVICE_ID_MEGARAID_SATA_300_4x		0x0409
-#define PCI_SUBSYS_ID_MEGARAID_SATA_300_4x		0x3004
-
-#define PCI_DEVICE_ID_MEGARAID_SATA_300_8x		0x0409
-#define PCI_SUBSYS_ID_MEGARAID_SATA_300_8x		0x3008
-
-#define PCI_DEVICE_ID_INTEL_RAID_SRCU42X		0x0407
-#define PCI_SUBSYS_ID_INTEL_RAID_SRCU42X		0x0532
+#define PCI_DEVICE_ID_LINDSAY				0x0409
 
 #define PCI_DEVICE_ID_INTEL_RAID_SRCS16			0x1960
 #define PCI_SUBSYS_ID_INTEL_RAID_SRCS16			0x0523
 
-#define PCI_DEVICE_ID_INTEL_RAID_SRCU42E		0x0408
-#define PCI_SUBSYS_ID_INTEL_RAID_SRCU42E		0x0002
-
-#define PCI_DEVICE_ID_INTEL_RAID_SRCZCRX		0x0407
-#define PCI_SUBSYS_ID_INTEL_RAID_SRCZCRX		0x0530
-
-#define PCI_DEVICE_ID_INTEL_RAID_SRCS28X		0x0409
-#define PCI_SUBSYS_ID_INTEL_RAID_SRCS28X		0x3008
-
-#define PCI_DEVICE_ID_INTEL_RAID_SROMBU42E_ALIEF	0x0408
-#define PCI_SUBSYS_ID_INTEL_RAID_SROMBU42E_ALIEF	0x3431
-
-#define PCI_DEVICE_ID_INTEL_RAID_SROMBU42E_HARWICH	0x0408
-#define PCI_SUBSYS_ID_INTEL_RAID_SROMBU42E_HARWICH	0x3499
-
 #define PCI_DEVICE_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK	0x1960
 #define PCI_SUBSYS_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK	0x0520
 
-#define PCI_DEVICE_ID_FSC_MEGARAID_PCI_EXPRESS_ROMB	0x0408
-#define PCI_SUBSYS_ID_FSC_MEGARAID_PCI_EXPRESS_ROMB	0x1065
-
-#define PCI_DEVICE_ID_MEGARAID_ACER_ROMB_2E		0x0408
-#define PCI_SUBSYS_ID_MEGARAID_ACER_ROMB_2E		0x004D
-
 #define PCI_SUBSYS_ID_PERC3_QC				0x0471
 #define PCI_SUBSYS_ID_PERC3_DC				0x0493
 #define PCI_SUBSYS_ID_PERC3_SC				0x0475
 
-#define PCI_DEVICE_ID_MEGARAID_NEC_ROMB_2E		0x0408
-#define PCI_SUBSYS_ID_MEGARAID_NEC_ROMB_2E		0x8287
-
-#ifndef PCI_SUBSYS_ID_FSC
-#define PCI_SUBSYS_ID_FSC				0x1734
-#endif
 
 #define MBOX_MAX_SCSI_CMDS	128	// number of cmds reserved for kernel
 #define MBOX_MAX_USER_CMDS	32	// number of cmds for applications
diff -Naur old/drivers/scsi/megaraid/megaraid_mm.c new/drivers/scsi/megaraid/megaraid_mm.c
--- old/drivers/scsi/megaraid/megaraid_mm.c	2005-05-16 11:19:54.620119192 -0400
+++ new/drivers/scsi/megaraid/megaraid_mm.c	2005-05-16 11:20:11.648530480 -0400
@@ -10,13 +10,12 @@
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: megaraid_mm.c
- * Version	: v2.20.2.5 (Jan 21 2005)
+ * Version	: v2.20.2.6 (Mar 7 2005)
  *
  * Common management module
  */
 
 #include "megaraid_mm.h"
-#include <linux/smp_lock.h>
 
 
 // Entry points for char node driver
@@ -61,7 +60,7 @@
 EXPORT_SYMBOL(mraid_mm_adapter_app_handle);
 
 static int majorno;
-static uint32_t drvr_ver	= 0x02200201;
+static uint32_t drvr_ver	= 0x02200206;
 
 static int adapters_count_g;
 static struct list_head adapters_list_g;
@@ -1231,9 +1230,9 @@
 		      unsigned long arg)
 {
 	int err;
-	lock_kernel();
+
 	err = mraid_mm_ioctl(NULL, filep, cmd, arg);
-	unlock_kernel();
+
 	return err;
 }
 #endif
diff -Naur old/drivers/scsi/megaraid/megaraid_mm.h new/drivers/scsi/megaraid/megaraid_mm.h
--- old/drivers/scsi/megaraid/megaraid_mm.h	2005-05-16 11:19:54.620119192 -0400
+++ new/drivers/scsi/megaraid/megaraid_mm.h	2005-05-16 11:20:11.648530480 -0400
@@ -29,9 +29,9 @@
 #include "megaraid_ioctl.h"
 
 
-#define LSI_COMMON_MOD_VERSION	"2.20.2.5"
+#define LSI_COMMON_MOD_VERSION	"2.20.2.6"
 #define LSI_COMMON_MOD_EXT_VERSION	\
-		"(Release Date: Fri Jan 21 00:01:03 EST 2005)"
+		"(Release Date: Mon Mar 7 00:01:03 EST 2005)"
 
 
 #define LSI_DBGLVL			dbglevel
