Linux version 2.5.70 (root@jumper) (gcc version 3.3 (Debian)) #1 ma kesä   16 20:57:57 EEST 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000bff0000 (usable) BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data) BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 191MB LOWMEM available. On node 0 totalpages: 49136 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 45040 pages, LIFO batch:10 HighMem zone: 0 pages, LIFO batch:1 IBM machine detected. Enabling interrupts during APM calls. IBM machine detected. Disabling SMBus accesses. Building zonelist for node : 0 Kernel command line: root=/dev/hda1 Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 448.147 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 884.73 BogoMIPS Memory: 190984k/196544k available (2010k kernel code, 4928k reserved, 606k data, 132k init, 0k highmem) Security Scaffold v1.0.0 initialized Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After generic, caps: 0383f9ff 00000000 00000000 00000040 CPU: Intel Pentium III (Coppermine) stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v2.0 (20020519) Initializing RT netlink socket PCI: PCI BIOS revision 2.10 entry at 0xfd96f, last bus=7 PCI: Using configuration type 1 BIO: pool of 256 setup, 15Kb (60 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) Linux Plug and Play Support v0.96 (c) Adam Belay pnp: the driver 'system' has been registered block request queues: 4/128 requests per read queue 4/128 requests per write queue enter congestion at 15 exit congestion at 17 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Discovered primary peer bus 08 [IRQ] PCI: Using IRQ router PIIX [8086/7110] at 00:06.0 SBF: ACPI BOOT descriptor is wrong length (39) SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) Enabling SEP on CPU 0 Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PCI: Found IRQ 10 for device 01:00.0 PCI: Sharing IRQ 10 with 00:02.0 PCI: Sharing IRQ 10 with 00:05.0 neofb: mapped io at cc80d000 Autodetected internal display Panel is a 1024x768 color TFT display neofb: mapped framebuffer at cca0e000 neofb v0.4.1: 2560kB VRAM, using 1024x768, 48.361kHz, 60Hz fb0: MagicGraph 256AV frame buffer device Console: switching to colour frame buffer device 128x48 pty: 256 Unix98 ptys configured Real Time Clock Driver v1.11 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: the driver 'serial' has been registered Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:06.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio hda: FUJITSU MHR2030AT, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 1024KiB hda: host protected area => 1 hda: 58605120 sectors (30006 MB) w/2048KiB Cache, CHS=3648/255/63, UDMA(33) hda:<4>hda: dma_timer_expiry: dma status == 0x22 hda: dma_timer_expiry: status=0x58 { DriveReady SeekComplete DataRequest } hda: irq timeout: status=0xd0 { Busy } hda: DMA disabled ide0: reset: success hda1 hda2 hda3 Console: switching to colour frame buffer device 128x48 PCI: Found IRQ 10 for device 00:02.0 PCI: Sharing IRQ 10 with 00:05.0 PCI: Sharing IRQ 10 with 01:00.0 Yenta IRQ list 0898, PCI irq10 Socket status: 30000006 PCI: Found IRQ 9 for device 00:02.1 Yenta IRQ list 0898, PCI irq9 Socket status: 30000020 mice: PS/2 mouse device common for all mice input: PC Speaker input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. spurious 8259A interrupt: IRQ7. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 132k freed Adding 996020k swap on /dev/hda3. Priority:-1 extents:1 EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda1, internal journal drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/core/usb.c: registered new driver usbkbd drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. 8139too Fast Ethernet driver 0.9.26 PCI: Enabling device 06:00.0 (0000 -> 0003) PCI: Setting latency timer of device 06:00.0 to 64 eth0: RealTek RTL8139 Fast Ethernet at 0xccd10000, 00:50:fc:2d:73:36, IRQ 9 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1. PCI: Enabling device 06:00.0 (0000 -> 0003) PCI: Setting latency timer of device 06:00.0 to 64 eth0: RealTek RTL8139 Fast Ethernet at 0xccd0e000, 00:50:fc:2d:73:36, IRQ 9 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff. PCI: Enabling device 06:00.0 (0000 -> 0003) PCI: Setting latency timer of device 06:00.0 to 64 eth0: RealTek RTL8139 Fast Ethernet at 0xccd0e000, 00:50:fc:2d:73:36, IRQ 9 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability ffff. Unable to handle kernel paging request at virtual address fffffff8 printing eip: c023916a *pde = 00001067 *pte = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010282 eax: fffffff4 ebx: 00000000 ecx: c037f924 edx: 00000000 esi: c8bd104c edi: ffffffdc ebp: 00000002 esp: cbd01f24 ds: 007b es: 007b ss: 0068 Process pccardd (pid: 10, threadinfo=cbd00000 task=cbdaa700) Stack: c8bd1070 c8bd10d2 00000014 c8bd1000 cbf2ff14 cbf2ff00 c020c89c c8bd104c cbf2ff0c cbf2ff00 cbf2ff14 c0280e77 cbf2ff00 00000009 cbd38208 00001880 cbd38200 00000000 00000080 cbd38200 c027dc89 cbd38200 0000000a c027d24a Call Trace: [] [] [] [] [] [] [] [] [] [] Code: 8b 50 04 89 06 89 70 04 89 32 89 56 04 89 c8 ba ff ff 00 00