After a kernel compiling, xterm does not work any more.
I did Xcongfigurator in the same way I had done on Red-hat 5.0.
With the previous kernel, startx still works well.
As I inserted "printk()"
,the consol is really busy deplaying the messages.
That's the only change.
Same kernel( 2.0.32), same hardware.
Do I need to do something on the kernel configuration( make xconfig)?
The message after "startx" is following
########################################################
Script started on Thu Oct 8 22:15:35 1998
[root@soho3 /root]# startx
XFree86 Version 3.3.1 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: August 4 1997
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.32 i586 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, et3000, pvga1,
wd90c00,
wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201,
sis86c202, sis86c205, tvga8200lx, tvga8800cs, tvga8900b,
tvga8900c,
tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b,
tvga9200cxr,
tgui9320lcd, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi,
tgui9440agi, tgui96xx, cyber938x, clgd5420, clgd5422, clgd5424,
clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436,
clgd5446,
clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215,
clgd6225,
clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555,
ncr77c22,
ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, oti067,
oti077,
oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308,
ali2401,
cl6410, cl6412, cl6420, cl6440, video7, ct65520, ct65525, ct65530,
ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554,
ct65555, ct68554, ct64200, ct64300, ark1000vl, ark1000pv,
ark2000pv,
ark2000mt, mx, realtek, AP6422, AT24, s3_virge, generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc101)"
(**) XKB: geometry: "pc"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) Mouse: type: PS/2, device: /dev/mouse, baudrate: 1200,
3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "GD 5446"
(**) SVGA: Monitor ID: "Samsung SyncMaster 17GLsi"
(--) SVGA: Invalid vertical timing for mode "400x300". Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) SVGA: PCI: Cirrus Logic GD5446 rev 0, Memory @ 0xfd000000
(--) SVGA: chipset: clgd5446
(--) SVGA: videoram: 1024k
(--) SVGA: clocks: 25.23 28.32 41.16 36.08 31.50 39.99 45.08
49.87
(--) SVGA: clocks: 64.98 72.16 75.00 80.01 85.23 90.00 95.02
100.23
(--) SVGA: clocks: 108.03 109.77 120.05 126.00 130.06 135.00
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 135.100 MHz
(**) SVGA: Mode "1024x768": mode clock = 75.000, clock used = 74.999
(**) SVGA: Virtual resolution set to 1024x768
(--) SVGA: Generic SpeedUps selected (Flags=0x30)
(--) SVGA: clgd5446: Internal memory clock register is 0x2a (Extended
RAS)
(**) SVGA: clgd5446: Approximate DRAM bandwidth for drawing: 75 of 150
MB/s
(--) SVGA: clgd5446: Using linear framebuffer at 0xfd000000 (4048MB)
(--) SVGA: clgd5446: 262144 bytes off-screen memory available
(--) SVGA: clgd5446: Using hardware cursor
(--) SVGA: clgd5446: Using accelerator functions
(--) SVGA: clgd5446: Using BitBLT engine
(**) SVGA: clgd5446: Using memory-mapped I/O
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: CPU to screen color expansion (bitmap, stipple, TE/NonTE
imagetext, TE/NonTE polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
Fatal server error:
Cannot open mouse (Operation not supported by device)
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
_X11TransSocketUNIXConnect: Can't connect: errno = 111
giving up.
xinit: Connection refused (errno 111): unable to connect to X server
xinit: No such process (errno 3): Server error.
[root@soho3 /root]#
[root@soho3 /root]#
[root@soho3 /root]# exit
Script done on Thu Oct 8 22:15:51 1998
########################################################################
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.rutgers.edu