Re: Problems with 2 cards

Renzo Alejandro Granados (alejo00@rocketmail.com)
Fri, 11 Sep 1998 13:07:46 -0700 (PDT)

On lilo.conf you must have append="ether=5,0x210,eth0
ether=10,0x230,eth1" and it must work... all this info is in the
ethernet howto.. if it does not work feel free to contact me and IŽll
try to help you more...

---rmaestrali@goldencross.com.br wrote:
>
> Dear Friend
>
> I have 3c509 cards installed in a Linux system (1 - 006097BB8984 -
> I/O=0x210 - IRQ=5, 2 - 00A02407C690 - I/O=0x230 - IRQ=10). When I run
> insmod 3c509, only the first one is detected and if I run the
command again
> it says that there is a 3c509 driver already installed. What should
I do ?
>
> I already put in the lilo.conf append="ether=0,0,eth0
ether=0,0,eth1" and
> not worked, I replaced with the I/O address and nothing
>
> Thanks in advance
>
> Renato Maestrali Moraes

===
*****************************************
* Renzo Alejandro Granados *
* Linux NetAdmin *
* Bogota-Colombia *
* http://members.xoom.com/renzoal *
* http://www.nettaxi.com/citizens/renzo*
*****************************************

_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com

-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.rutgers.edu