>
> Exactly what problems are you having?
Oh boy, all kinds of problems :)
My 'network' consists of my ppp account to my ISP, another linux box, and
a sparc 2. I have no problem assigning '192.107.200.0' as a network on my
sparc, but I can't get it to work like it used to on my linux boxes with
redhat 4.0.
There seems to be something more fundamentally wrong here. Even something
as simple as 'route add -net 127.0.0.0' gives me 'SIOCADDRT: Network is
unreachable'.
For completeness, allow me to show my ifconfig output:
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0
TX packets:2 errors:0 dropped:0 overruns:0
eth0 Link encap:10Mbps Ethernet HWaddr 00:A0:24:6F:D5:F8
inet addr:192.107.108.4 Bcast:192.107.108.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:9504 errors:0 dropped:0 overruns:0
TX packets:4042 errors:0 dropped:0 overruns:0
Interrupt:12 Base address:0x210
> You can't just pull an individual IP address out of the air and expect it
> to work, even if your network isnt connected to the Internet.
Why is this?
>
> One important thing is that it be in the same "subnet" that other TCP/IP
> computers are on on the same network. This would be set/assigned by your
> network admin.. Check with them.
I _am_ the network admin :) Admittedly, I don't seem to be a very good one
:)
Thanks,
Dave
-- echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sb20293A2058554E494Csnlbxq'|dc