My problem is seemingly very fundamental. ifconfig shows that eth0 and lo
exist, and are configured correctly, but doing something as simple as
'route add -net 127.0.0.0' fail with 'SIOCADDRT: Network is unreachable'.
I am successful in adding the eth0 device example from the manpage, that
is, 'route add -net 192.56.76.0 netmask 255.255.255.0 dev eth0', but using
my fake IP address that I have used before, 'route add -net 192.107.200.0
netmask 255.255.255.0 dev eth0' gives me 'route: netmask doesn't match
route address'.
What could be the problem? What changed with route that could cause this
effect? I have had this configured this way in the past with no problem..
Thanks for any ideas,
Dave Wreski
-- echo '16i[q]sa[ln0=aln100%Pln100/snlbx]sb20293A2058554E494Csnlbxq'|dc