Hi,
After installing iproute2-2.2.4-now-ss990417-2.i386.rpm I tried to use it,
and I got some errors.
If I use ip route list I get
x.y.8.114 dev eth1 scope link
x.y.7.38 dev eth0 scope link
x.y.8.112/28 dev eth1 proto kernel scope link src x.y.8.114
x.y.7.0/24 dev eth0 proto kernel scope link src x.y.7.38
127.0.0.0/8 dev lo scope link
default via x.y.7.1 dev eth0
Whenever I try to use ip rule
[root@gw1 2.2.16-3smp] ip rule add from x.y.8.114 table 200
I also tried using a number for the table, as well as "new" but I keep
getting the same error.
I get the following error message.
[root@gw1 2.2.16-3smp] RTNETLINK error: Invalid argument
The syntax is...
[root@gw1 2.2.16-3smp]# ip rule help
Usage: ip rule [ list | add | del ] SELECTOR ACTION
SELECTOR := [ from PREFIX ] [ to PREFIX ] [ tos TOS ] [ fwmark FWMARK ]
[ dev STRING ] [ pref NUMBER ]
ACTION := [ table TABLE_ID ] [ nat ADDRESS ]
[ prohibit | reject | unreachable ]
[ realms [SRCREALM/]DSTREALM ]
TABLE_ID := [ local | main | default | new | NUMBER ]
Do I have to do anything else when I install iproute2??
Thanks in advance.
Adonis
On Thu, 19 Oct 2000, Randall W. Dean wrote:
> It took me a couple of weeks to find a solution to this problem. In my
> case, I had a static PPP connection and was brining on a DSL connection to
> the internet. I wanted to have both active for some cut over period. To
> make this work, you need to use source routing. With this, it works like a
> charm.
>
> So, for a concrete example:
>
> eth0 is 99.99.99.99 router 99.99.99.100
> eth1 is 199.199.199.199 router 199.199.199.200
>
> My default route is set to 99.99.99.100
>
> Install iproute2
> Edit /etc/iproute2/rt_tables and add a line like "200 other"
>
> ip rule add from 199.199.199.199 lookup other
> ip route add default via 199.199.199.200 table other
>
> That's all it takes. A rule now exists to send out through eth1 any
> packets that originate from 199.199.199.199 which is what any connection to
> that interface will have for a response ip address.
>
> -rwd
>
> At 10:18 AM 10/19/00 -0400, technews@egsx.com wrote:
> >Hi,
> >
> >I would like to know if a Linux box with two ethermet cards eth0 and eth1
> >can handle the following routing requierments.
> >
> >If traffic is received via eth0 the packets are routed back throught eth0
> >and if traffic is received through eth1 the packets are routed back
> >through eth1.
> >
> >Each ethernet card has its own IP and are connected to different routers
> >that are connected to the net. Can this be done with static routing? or
> >is there something that has to be installed to do that since the default
> >gateway will always force teh traffic to go over eth0.
> >
> >Thanks in advance
> >Adonis
> >
> >
> >
> >
> >-
> >To unsubscribe from this list: send the line "unsubscribe linux-net" in
> >the body of a message to majordomo@vger.kernel.org
>
>
>
> Randall W Dean
> Director, System Software
> Mercury Computer Systems
> 199 Riverneck Road
> Chelmsford, MA 01824
> (978) 256 0052 x1493
> FAX: (978) 256 5205
>
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@vger.kernel.org
This archive was generated by hypermail 2b29 : Mon Oct 23 2000 - 21:00:24 EST