I saw none of these errors in any of my logs. Here is my syslog.conf. I
think its right, but let me know if i should add anything:
*.=info;*.=notice /usr/adm/messages
*.=debug /usr/adm/debug
mail.err /dev/console
mail.debug /var/log/maillog
*.warn /usr/adm/syslog
*.err /usr/adm/syslog
s
--On Friday, June 9, 2000 9:24 AM -0400 "Scott R. Every" <scott@emji.net>
wrote:
>> The points important for diagnostic are:
>> - Do you see messages "can't fill rx buffer"?
>> These messages mean that the driver experience allocation failures
>> because of high load creating high memory pressure.
>> - Do you see messages "card reports no RX buffers (no resources)"?
>> These messages mean that the card realize receive buffer shortage,
>> too. - When the driver manages to allocate buffers again, it issues
>> message "restart the receiver after a possible hang". It should appear
>> after the above messages.
>> The things may be complicated by the fact that the receiver hang may be
>> followed by an unreasonable transmitter hang.
-- Scott R. Every - mailto:scott@emji.net EMJ Internet - http://www.emji.net voice : 1-888-258-8959 fax : 1-919-363-4425 - To unsubscribe from this list: send the line "unsubscribe linux-net" in the body of a message to majordomo@vger.rutgers.edu
This archive was generated by hypermail 2b29 : Thu Jun 15 2000 - 21:00:40 EST