> On Thu, 18 Jun 1998, Jochen Heuer wrote:
> > If I load the needed modules by doing _modprobe aha152x aha152x=0x340_
> > the controller is found but not the attached cdrom. Here comes some
> > output from syslog:
> Just a wild guess, but do you have the scsi CD-ROM module (sr_mod) loaded?
I don't think this is needed for the cdrom to be seen in /proc/scsi/scsi.
> That, along with a rescanning of the scsi bus should get you going. You
> can also use the
I always thought that the adapter scans the bus when it is inserted.
> echo "scsi add-single-device <host> <channel> <id> <lun>" > \
> hack as documented in linux/drivers/scsi/scsi.c to manually add the
> cdrom, or hack /etc/conf.modules to insert the sr_mod module after
> installing aha152x.
This does not help bringing the cdrom to life either :( I tried it with
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to email@example.com