Re: [PATCH v3 0/2] fw_devlink overlay fix

From: Herve Codina
Date: Tue Apr 23 2024 - 04:39:44 EST


Hi Saravana,

On Thu, 11 Apr 2024 16:56:20 -0700
Saravana Kannan <saravanak@xxxxxxxxxx> wrote:

> Overlays don't work correctly with fw_devlink. This patch series fixes
> it. This series is now ready for review and merging once Geert and Herve
> give they Tested-by.
>
> Geert and Herve,
>
> This patch series should hopefully fix both of your use cases [1][2][3].
> Can you please check to make sure the device links created to/from the
> overlay devices are to/from the right ones?
>
> Thanks,
> Saravana
>

I tested the series.

On my Microchip use case (i.e. DT overlay on a PCIe device), I observed that
some driver removal were done in a wrong order. For instance, the onboard
PCIe device interrupt controller (oic@e00c0120) was removed before its
consumers.

I enabled debug traces in core.c and observed that many links were dropped.
These links are related to pinctrl, clock, reset, interrupts, ...
I have the feeling that these links should not be dropped.

Here are extracted traces:
--- 8< ---
[ 9.225355] mchp_lan966x 0000:01:00.0: enabling device (0000 -> 0002)
[ 9.279024] device: 'd0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0': device_add
[ 9.286555] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/switch@e0000000 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/oic@e00c0120
[ 9.302168] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/switch@e0000000 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/reset@e200400c
[ 9.317489] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/switch@e0000000 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/pinctrl@e2004064/tod_pins
...
[ 9.403387] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/mdio@e200413c Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/reset@e200400c
[ 9.418466] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/sfp-eth3 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/pinctrl@e2004064
[ 9.433263] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/sfp-eth2 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/pinctrl@e2004064
...
[ 9.495849] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/flexcom@e0040000 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/clock-controller@e00c00a8
[ 9.512111] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/flexcom@e0040000/i2c@600 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/oic@e00c0120
[ 9.527931] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/flexcom@e0040000/i2c@600 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/clock-controller@e00c00a8
[ 9.544878] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/flexcom@e0040000/i2c@600 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/pinctrl@e2004064/fcb4-i2c-pins
...
[ 9.562283] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/pinctrl@e2004064 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/reset@e200400c
[ 9.577563] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/pinctrl@e2004064 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/oic@e00c0120
...
[ 9.592813] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/clock-controller@e00c00a8 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/cpu_clk
[ 9.608258] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/clock-controller@e00c00a8 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/ddr_clk
[ 9.623731] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/clock-controller@e00c00a8 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/sys_clk
[ 9.639269] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/oic@e00c0120 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0
[ 9.651930] device: 'pci:0000:01:00.0--platform:d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0': device_add
[ 9.661716] platform d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0: Linked as a sync state only consumer to 0000:01:00.0
...
[ 9.803560] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/sfp-eth2 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0
[ 9.816827] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/sfp-eth2 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/pinctrl@e2004064
[ 9.831309] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/sfp-eth3 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0
[ 9.844561] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/sfp-eth3 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/pinctrl@e2004064
...
[ 9.919384] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/flexcom@e0040000/i2c@600 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0
[ 9.934028] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/flexcom@e0040000/i2c@600 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/pinctrl@e2004064/fcb4-i2c-pins
[ 9.951138] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/switch@e0000000 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0
[ 9.965012] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/switch@e0000000 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/pinctrl@e2004064/tod_pins
[ 9.980886] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/pinctrl@e2004064 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0
[ 9.994831] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/pinctrl@e2004064 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/reset@e200400c
[ 10.009834] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/mdio@e200413c Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0
[ 10.023520] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/mdio@e200413c Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/reset@e200400c
[ 10.038248] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/switch@e0000000 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/reset@e200400c
[ 10.053160] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/flexcom@e0040000/i2c@600 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/clock-controller@e00c00a8
[ 10.069820] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/flexcom@e0040000 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0
[ 10.083772] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/flexcom@e0040000 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/clock-controller@e00c00a8
[ 10.099739] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/clock-controller@e00c00a8 Linked as a fwnode consumer to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0
[ 10.114471] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/clock-controller@e00c00a8 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/sys_clk
[ 10.129648] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/clock-controller@e00c00a8 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/ddr_clk
[ 10.144818] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/clock-controller@e00c00a8 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/cpu_clk
[ 10.159986] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/pinctrl@e2004064 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/oic@e00c0120
[ 10.174802] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/flexcom@e0040000/i2c@600 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/oic@e00c0120
[ 10.190323] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/switch@e0000000 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/oic@e00c0120
[ 10.205098] simple-pm-bus d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0: Dropping the link to 0000:01:00.0
[ 10.214501] device: 'pci:0000:01:00.0--platform:d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0': device_unregister
[ 10.225187] device: 'ea000000.switch': device_add
[ 10.230321] device: 'platform:d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0--platform:ea000000.switch': device_add
[ 10.240806] devices_kset: Moving ea000000.switch to end of list
[ 10.246794] platform ea000000.switch: Linked as a consumer to d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0
[ 10.256399] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/switch@e0000000 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0
[ 10.270803] device: 'e800413c.mdio': device_add
[ 10.275775] device: 'platform:d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0--platform:e800413c.mdio': device_add
[ 10.286036] devices_kset: Moving e800413c.mdio to end of list
[ 10.291863] platform e800413c.mdio: Linked as a consumer to d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0
[ 10.301213] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/mdio@e200413c Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0
[ 10.315260] mscc-miim e800413c.mdio: error -EPROBE_DEFER: Failed to get reset
...
[ 10.387676] device: 'd0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0:sfp-eth3': device_add
[ 10.388124] devices_kset: Moving ea000000.switch to end of list
[ 10.402096] device: 'platform:d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0--platform:d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0:sfp-eth3': device_add
[ 10.416004] devices_kset: Moving d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0:sfp-eth3 to end of list
[ 10.425281] platform d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0:sfp-eth3: Linked as a consumer to d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0
[ 10.437942] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/sfp-eth3 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0
[ 10.451352] devices_kset: Moving e800413c.mdio to end of list
[ 10.451912] device: 'd0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0:sfp-eth2': device_add
[ 10.458161] mscc-miim e800413c.mdio: error -EPROBE_DEFER: Failed to get reset
[ 10.466501] device: 'platform:d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0--platform:d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0:sfp-eth2': device_add
[ 10.485906] devices_kset: Moving d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0:sfp-eth2 to end of list
[ 10.495096] platform d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0:sfp-eth2: Linked as a consumer to d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0
[ 10.507855] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/sfp-eth2 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0
...
[ 10.580486] device: 'ea040000.flexcom': device_add
[ 10.585753] device: 'platform:d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0--platform:ea040000.flexcom': device_add
[ 10.596336] devices_kset: Moving ea040000.flexcom to end of list
[ 10.602429] platform ea040000.flexcom: Linked as a consumer to d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0
[ 10.612031] /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0/flexcom@e0040000 Dropping the fwnode link to /soc/pcie@d0070000/pci@0,0/dev@0,0/pci-ep-bus@0
[ 10.626863] device: 'e8004064.pinctrl': device_add
[ 10.632045] device: 'platform:d0070000.pcie:pci@0,0:dev@0,0:pci-ep-bus@0--platform:e8004064.pinctrl': device_add
...
--- 8< ---


Here is the related dtso applied at the PCIe device DT node:
--- 8< ---
/ {
fragment@0 {
target-path="";
__overlay__ {
#address-cells = <3>;
#size-cells = <2>;

pci-ep-bus@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;

/*
* map @0xe2000000 (32MB) to BAR0 (CPU)
* map @0xe0000000 (16MB) to BAR1 (AMBA)
*/
ranges = <0xe2000000 0x00 0x00 0x00 0x2000000
0xe0000000 0x01 0x00 0x00 0x1000000>;

oic: oic@e00c0120 {
compatible = "microchip,lan966x-oic";
#interrupt-cells = <2>;
interrupt-controller;
interrupts = <0>; /* PCI INTx assigned interrupt */
reg = <0xe00c0120 0x190>;
};

cpu_clk: cpu_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <600000000>; // CPU clock = 600MHz
};

ddr_clk: ddr_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <30000000>; // Fabric clock = 30MHz
};

sys_clk: sys_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <15625000>; // System clock = 15.625MHz
};

clks: clock-controller@e00c00a8 {
compatible = "microchip,lan966x-gck";
#clock-cells = <1>;
clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
clock-names = "cpu", "ddr", "sys";
reg = <0xe00c00a8 0x38>, <0xe00c02cc 0x4>;
};

cpu_ctrl: syscon@e00c0000 {
compatible = "microchip,lan966x-cpu-syscon", "syscon";
reg = <0xe00c0000 0xa8>;
};

reset: reset@e200400c {
compatible = "microchip,lan966x-switch-reset";
reg = <0xe200400c 0x4>;
reg-names = "gcb";
#reset-cells = <1>;
cpu-syscon = <&cpu_ctrl>;
};

gpio: pinctrl@e2004064 {
compatible = "microchip,lan966x-pinctrl";
reg = <0xe2004064 0xb4>,
<0xe2010024 0x138>;
resets = <&reset 0>;
reset-names = "switch";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&gpio 0 0 78>;
interrupt-parent = <&oic>;
interrupt-controller;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;

tod_pins: tod_pins {
pins = "GPIO_36";
function = "ptpsync_1";
};

fc0_a_pins: fcb4-i2c-pins {
/* RXD, TXD */
pins = "GPIO_9", "GPIO_10";
function = "fc0_a";
};

i2cmux_pins: i2cmux-pins {
pins = "GPIO_76", "GPIO_77";
function = "twi_slc_gate";
output-low;
};

i2cmux_0: i2cmux-0 {
pins = "GPIO_76";
function = "twi_slc_gate";
output-high;
};

i2cmux_1: i2cmux-1 {
pins = "GPIO_77";
function = "twi_slc_gate";
output-high;
};
};

flx0: flexcom@e0040000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xe0040000 0x100>;
clocks = <&clks GCK_ID_FLEXCOM0>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xe0040000 0x800>;

atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;

i2c_lan966x: i2c@600 {
compatible = "microchip,lan966x-i2c";
reg = <0x600 0x200>;
interrupt-parent = <&oic>;
interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clks GCK_ID_FLEXCOM0>;
assigned-clocks = <&clks GCK_ID_FLEXCOM0>;
assigned-clock-rates = <20000000>;
pinctrl-0 = <&fc0_a_pins>;
pinctrl-names = "default";
i2c-analog-filter;
i2c-digital-filter;
i2c-digital-filter-width-ns = <35>;
};
};

i2c0_emux: i2c0-emux@0 {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c_lan966x>;
pinctrl-names = "i2c102", "i2c103", "idle";
pinctrl-0 = <&i2cmux_0>;
pinctrl-1 = <&i2cmux_1>;
pinctrl-2 = <&i2cmux_pins>;

i2c102: i2c_sfp1 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
};

i2c103: i2c_sfp2 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
};

sfp_eth2: sfp-eth2 {
compatible = "sff,sfp";
i2c-bus = <&i2c102>;
tx-disable-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
los-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
};

sfp_eth3: sfp-eth3 {
compatible = "sff,sfp";
i2c-bus = <&i2c103>;
tx-disable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
los-gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
mod-def0-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
tx-fault-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
};

serdes: serdes@e202c000 {
compatible = "microchip,lan966x-serdes";
reg = <0xe202c000 0x9c>,
<0xe2004010 0x4>;
#phy-cells = <2>;
};

mdio1: mdio@e200413c {
#address-cells = <1>;
#size-cells = <0>;
compatible = "microchip,lan966x-miim";
reg = <0xe200413c 0x24>,
<0xe2010020 0x4>;

resets = <&reset 0>;
reset-names = "switch";

lan966x_phy0: ethernet-lan966x_phy@1 {
reg = <1>;
};

lan966x_phy1: ethernet-lan966x_phy@2 {
reg = <2>;
};
};

switch: switch@e0000000 {
compatible = "microchip,lan966x-switch";
reg = <0xe0000000 0x0100000>,
<0xe2000000 0x0800000>;
reg-names = "cpu", "gcb";

interrupt-parent = <&oic>;
interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
<9 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "xtr", "ana";

resets = <&reset 0>;
reset-names = "switch";

pinctrl-names = "default";
pinctrl-0 = <&tod_pins>;

ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;

port0: port@0 {
phy-handle = <&lan966x_phy0>;

reg = <0>;
phy-mode = "gmii";
phys = <&serdes 0 CU(0)>;
};

port1: port@1 {
phy-handle = <&lan966x_phy1>;

reg = <1>;
phy-mode = "gmii";
phys = <&serdes 1 CU(1)>;
};

port2: port@2 {
reg = <2>;
phy-mode = "sgmii";
phys = <&serdes 2 SERDES6G(0)>;
sfp = <&sfp_eth2>;
managed = "in-band-status";
};

port3: port@3 {
reg = <3>;
phy-mode = "sgmii";
phys = <&serdes 3 SERDES6G(1)>;
sfp = <&sfp_eth3>;
managed = "in-band-status";
};
};
};
};
};
};
};
--- 8< ---

Best regards,
Hervé