Re: [PATCH v8 2/4] drm/bridge: add lvds controller support for sam9x7

From: Dmitry Baryshkov
Date: Sun Apr 21 2024 - 13:24:38 EST


On Sun, Apr 21, 2024 at 06:40:48AM +0530, Dharma Balasubiramani wrote:
> Add a new LVDS controller driver for sam9x7 which does the following:
> - Prepares and enables the LVDS Peripheral clock
> - Defines its connector type as DRM_MODE_CONNECTOR_LVDS and adds itself
> to the global bridge list.
> - Identifies its output endpoint as panel and adds it to the encoder
> display pipeline
> - Enables the LVDS serializer
>
> Signed-off-by: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
> Signed-off-by: Dharma Balasubiramani <dharma.b@xxxxxxxxxxxxx>
> Acked-by: Hari Prasath Gujulan Elango <hari.prasathge@xxxxxxxxxxxxx>
> ---
> Changelog
> v7 -> v8
> - Assign ret variable properly before checking it for err.
> v6 -> v7
> - Remove setting encoder type from bridge driver.
> - Drop clk_disable() from pm_runtime_get_sync() error handling.
> - Use devm_clk_get() instead of prepared version.
> - Hence use clk_prepare_enable() and clk_disable_unprepare().
> - Use devm_drm_of_get_bridge() instead of devm_drm_panel_bridge_add().
> - Add error check for devm_pm_runtime_enable().
> - Use dev_err() instead of DRM_DEV_ERROR() as it is deprecated.
> - Add missing Acked-by tag.
> v5 -> v6
> - No Changes.
> v4 -> v5
> - Drop the unused variable 'format'.
> - Use DRM wrapper for dev_err() to maintain uniformity.
> - return -ENODEV instead of -EINVAL to maintain consistency with other DRM
> bridge drivers.
> v3 -> v4
> - No changes.
> v2 ->v3
> - Correct Typo error "serializer".
> - Consolidate get() and prepare() functions and use devm_clk_get_prepared().
> - Remove unused variable 'ret' in probe().
> - Use devm_pm_runtime_enable() and drop the mchp_lvds_remove().
> v1 -> v2
> - Drop 'res' variable and combine two lines into one.
> - Handle deferred probe properly, use dev_err_probe().
> - Don't print anything on deferred probe. Dropped print.
> - Remove the MODULE_ALIAS and add MODULE_DEVICE_TABLE().
> - symbol 'mchp_lvds_driver' was not declared. It should be static.
> ---
> drivers/gpu/drm/bridge/Kconfig | 7 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/microchip-lvds.c | 229 ++++++++++++++++++++++++
> 3 files changed, 237 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/microchip-lvds.c
>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>


--
With best wishes
Dmitry