[PATCH v3 2/2] power: supply: ltc3350-charger: Add driver

From: Mike Looijmans
Date: Tue Apr 09 2024 - 09:57:01 EST


The LTC3350 is a backup power controller that can charge and monitor
a series stack of one to four supercapacitors.

Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>

---

(no changes since v2)

Changes in v2:
Duplicate "vin_ov" and "vin_uv" attributes

drivers/power/supply/Kconfig | 10 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/ltc3350-charger.c | 718 +++++++++++++++++++++++++
3 files changed, 729 insertions(+)
create mode 100644 drivers/power/supply/ltc3350-charger.c

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 3e31375491d5..7cb1a66e522d 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -514,6 +514,16 @@ config CHARGER_LT3651
Say Y to include support for the Analog Devices (Linear Technology)
LT3651 battery charger which reports its status via GPIO lines.

+config CHARGER_LTC3350
+ tristate "LTC3350 Supercapacitor Backup Controller and System Monitor"
+ depends on I2C
+ select REGMAP_I2C
+ select I2C_SMBUS
+ help
+ Say Y to include support for the Analog Devices (Linear Technology)
+ LTC3350 Supercapacitor Backup Controller and System Monitor connected
+ to I2C.
+
config CHARGER_LTC4162L
tristate "LTC4162-L charger"
depends on I2C
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 58b567278034..a8d618e4ac91 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o
obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o
obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
obj-$(CONFIG_CHARGER_LT3651) += lt3651-charger.o
+obj-$(CONFIG_CHARGER_LTC3350) += ltc3350-charger.o
obj-$(CONFIG_CHARGER_LTC4162L) += ltc4162-l-charger.o
obj-$(CONFIG_CHARGER_MAX14577) += max14577_charger.o
obj-$(CONFIG_CHARGER_DETECTOR_MAX14656) += max14656_charger_detector.o
diff --git a/drivers/power/supply/ltc3350-charger.c b/drivers/power/supply/ltc3350-charger.c
new file mode 100644
index 000000000000..84c7a3ca914e
--- /dev/null
+++ b/drivers/power/supply/ltc3350-charger.c
@@ -0,0 +1,718 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Analog Devices (Linear Technology) LTC3350
+ * High Current Supercapacitor Backup Controller and System Monitor
+ * Copyright (C) 2024, Topic Embedded Products
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/power_supply.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+
+/* Registers (names based on what datasheet uses) */
+#define LTC3350_REG_CLR_ALARMS 0x00
+#define LTC3350_REG_MSK_ALARMS 0x01
+#define LTC3350_REG_MSK_MON_STATUS 0x02
+#define LTC3350_REG_CAP_ESR_PER 0x04
+#define LTC3350_REG_VCAPFB_DAC 0x05
+#define LTC3350_REG_VSHUNT 0x06
+#define LTC3350_REG_CAP_UV_LVL 0x07
+#define LTC3350_REG_CAP_OV_LVL 0x08
+#define LTC3350_REG_GPI_UV_LVL 0x09
+#define LTC3350_REG_GPI_OV_LVL 0x0A
+#define LTC3350_REG_VIN_UV_LVL 0x0B
+#define LTC3350_REG_VIN_OV_LVL 0x0C
+#define LTC3350_REG_VCAP_UV_LVL 0x0D
+#define LTC3350_REG_VCAP_OV_LVL 0x0E
+#define LTC3350_REG_VOUT_UV_LVL 0x0F
+#define LTC3350_REG_VOUT_OV_LVL 0x10
+#define LTC3350_REG_IIN_OC_LVL 0x11
+#define LTC3350_REG_ICHG_UC_LVL 0x12
+#define LTC3350_REG_DTEMP_COLD_LVL 0x13
+#define LTC3350_REG_DTEMP_HOT_LVL 0x14
+#define LTC3350_REG_ESR_HI_LVL 0x15
+#define LTC3350_REG_CAP_LO_LVL 0x16
+#define LTC3350_REG_CTL_REG 0x17
+#define LTC3350_REG_NUM_CAPS 0x1A
+#define LTC3350_REG_CHRG_STATUS 0x1B
+#define LTC3350_REG_MON_STATUS 0x1C
+#define LTC3350_REG_ALARM_REG 0x1D
+#define LTC3350_REG_MEAS_CAP 0x1E
+#define LTC3350_REG_MEAS_ESR 0x1F
+#define LTC3350_REG_MEAS_VCAP1 0x20
+#define LTC3350_REG_MEAS_VCAP2 0x21
+#define LTC3350_REG_MEAS_VCAP3 0x22
+#define LTC3350_REG_MEAS_VCAP4 0x23
+#define LTC3350_REG_MEAS_GPI 0x24
+#define LTC3350_REG_MEAS_VIN 0x25
+#define LTC3350_REG_MEAS_VCAP 0x26
+#define LTC3350_REG_MEAS_VOUT 0x27
+#define LTC3350_REG_MEAS_IIN 0x28
+#define LTC3350_REG_MEAS_ICHG 0x29
+#define LTC3350_REG_MEAS_DTEMP 0x2A
+
+/* LTC3350_REG_CLR_ALARMS, LTC3350_REG_MASK_ALARMS, LTC3350_REG_ALARM_REG */
+#define LTC3350_MSK_CAP_UV BIT(0) /* capacitor undervoltage alarm */
+#define LTC3350_MSK_CAP_OV BIT(1) /* capacitor overvoltage alarm */
+#define LTC3350_MSK_GPI_UV BIT(2) /* GPI undervoltage alarm */
+#define LTC3350_MSK_GPI_OV BIT(3) /* GPI overvoltage alarm */
+#define LTC3350_MSK_VIN_UV BIT(4) /* VIN undervoltage alarm */
+#define LTC3350_MSK_VIN_OV BIT(5) /* VIN overvoltage alarm */
+#define LTC3350_MSK_VCAP_UV BIT(6) /* VCAP undervoltage alarm */
+#define LTC3350_MSK_VCAP_OV BIT(7) /* VCAP overvoltage alarm */
+#define LTC3350_MSK_VOUT_UV BIT(8) /* VOUT undervoltage alarm */
+#define LTC3350_MSK_VOUT_OV BIT(9) /* VOUT overvoltage alarm */
+#define LTC3350_MSK_IIN_OC BIT(10) /* input overcurrent alarm */
+#define LTC3350_MSK_ICHG_UC BIT(11) /* charge undercurrent alarm */
+#define LTC3350_MSK_DTEMP_COLD BIT(12) /* die temperature cold alarm */
+#define LTC3350_MSK_DTEMP_HOT BIT(13) /* die temperature hot alarm */
+#define LTC3350_MSK_ESR_HI BIT(14) /* ESR high alarm */
+#define LTC3350_MSK_CAP_LO BIT(15) /* capacitance low alarm */
+
+/* LTC3350_REG_MSK_MON_STATUS masks */
+#define LTC3350_MSK_MON_CAPESR_ACTIVE BIT(0)
+#define LTC3350_MSK_MON_CAPESR_SCHEDULED BIT(1)
+#define LTC3350_MSK_MON_CAPESR_PENDING BIT(2)
+#define LTC3350_MSK_MON_CAP_DONE BIT(3)
+#define LTC3350_MSK_MON_ESR_DONE BIT(4)
+#define LTC3350_MSK_MON_CAP_FAILED BIT(5)
+#define LTC3350_MSK_MON_ESR_FAILED BIT(6)
+#define LTC3350_MSK_MON_POWER_FAILED BIT(8)
+#define LTC3350_MSK_MON_POWER_RETURNED BIT(9)
+
+/* LTC3350_REG_CTL_REG */
+/* Begin a capacitance and ESR measurement when possible */
+#define LTC3350_CTL_STRT_CAPESR BIT(0)
+/* A one in this bit location enables the input buffer on the GPI pin */
+#define LTC3350_CTL_GPI_BUFFER_EN BIT(1)
+/* Stops an active capacitance/ESR measurement */
+#define LTC3350_CTL_STOP_CAPESR BIT(2)
+/* Increases capacitor measurement resolution by 100x for smaller capacitors */
+#define LTC3350_CTL_CAP_SCALE BIT(3)
+
+/* LTC3350_REG_CHRG_STATUS */
+#define LTC3350_CHRG_STEPDOWN BIT(0) /* Synchronous controller in step-down mode (charging) */
+#define LTC3350_CHRG_STEPUP BIT(1) /* Synchronous controller in step-up mode (backup) */
+#define LTC3350_CHRG_CV BIT(2) /* The charger is in constant voltage mode */
+#define LTC3350_CHRG_UVLO BIT(3) /* The charger is in undervoltage lockout */
+#define LTC3350_CHRG_INPUT_ILIM BIT(4) /* The charger is in input current limit */
+#define LTC3350_CHRG_CAPPG BIT(5) /* The capacitor voltage is above power good threshold */
+#define LTC3350_CHRG_SHNT BIT(6) /* The capacitor manager is shunting */
+#define LTC3350_CHRG_BAL BIT(7) /* The capacitor manager is balancing */
+#define LTC3350_CHRG_DIS BIT(8) /* Charger disabled for capacitance measurement */
+#define LTC3350_CHRG_CI BIT(9) /* The charger is in constant current mode */
+#define LTC3350_CHRG_PFO BIT(11) /* Input voltage is below PFI threshold */
+
+/* LTC3350_REG_MON_STATUS */
+#define LTC3350_MON_CAPESR_ACTIVE BIT(0) /* Capacitance/ESR measurement in progress */
+#define LTC3350_MON_CAPESR_SCHEDULED BIT(1) /* Waiting programmed time */
+#define LTC3350_MON_CAPESR_PENDING BIT(2) /* Waiting for satisfactory conditions */
+#define LTC3350_MON_CAP_DONE BIT(3) /* Capacitance measurement has completed */
+#define LTC3350_MON_ESR_DONE BIT(4) /* ESR Measurement has completed */
+#define LTC3350_MON_CAP_FAILED BIT(5) /* Last capacitance measurement failed */
+#define LTC3350_MON_ESR_FAILED BIT(6) /* Last ESR measurement failed */
+#define LTC3350_MON_POWER_FAILED BIT(8) /* Unable to charge */
+#define LTC3350_MON_POWER_RETURNED BIT(9) /* Able to charge */
+
+
+struct ltc3350_info {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct power_supply *charger;
+ u32 rsnsc; /* Series resistor that sets charge current, microOhm */
+ u32 rsnsi; /* Series resistor to measure input current, microOhm */
+};
+
+/*
+ * About LTC3350 "alarm" functions: Setting a bit in the LTC3350_REG_MSK_ALARMS
+ * register enables the alarm. The alarm will trigger an SMBALERT only once.
+ * To reset the alarm, write a "1" bit to LTC3350_REG_CLR_ALARMS. Then the alarm
+ * will trigger another SMBALERT when conditions are met (may be immediately).
+ * After writing to one of the corresponding level registers, enable the alarm,
+ * so that a UEVENT triggers when the alarm goes off.
+ */
+static void ltc3350_enable_alarm(struct ltc3350_info *info, unsigned int reg)
+{
+ unsigned int mask;
+
+ /* Register locations correspond to alarm mask bits */
+ mask = BIT(reg - LTC3350_REG_CAP_UV_LVL);
+ /* Clear the alarm bit so it may trigger again */
+ regmap_write(info->regmap, LTC3350_REG_CLR_ALARMS, mask);
+ /* Enable the alarm */
+ regmap_update_bits(info->regmap, LTC3350_REG_MSK_ALARMS, mask, mask);
+}
+
+/* Convert enum value to POWER_SUPPLY_STATUS value */
+static int ltc3350_state_decode(unsigned int value)
+{
+ if (value & LTC3350_CHRG_STEPUP)
+ return POWER_SUPPLY_STATUS_DISCHARGING; /* running on backup */
+
+ if (value & LTC3350_CHRG_PFO)
+ return POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+ if (value & LTC3350_CHRG_STEPDOWN) {
+ /* The chip remains in CV mode indefinitely, hence "full" */
+ if (value & LTC3350_CHRG_CV)
+ return POWER_SUPPLY_STATUS_FULL;
+
+ return POWER_SUPPLY_STATUS_CHARGING;
+ }
+
+ /* Not in step down? Must be full then (never seen this) */
+ return POWER_SUPPLY_STATUS_FULL;
+};
+
+static int ltc3350_get_status(struct ltc3350_info *info, union power_supply_propval *val)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(info->regmap, LTC3350_REG_CHRG_STATUS, &regval);
+ if (ret)
+ return ret;
+
+ val->intval = ltc3350_state_decode(regval);
+
+ return 0;
+}
+
+static int ltc3350_charge_status_decode(unsigned int value)
+{
+ if (!(value & LTC3350_CHRG_STEPDOWN))
+ return POWER_SUPPLY_CHARGE_TYPE_NONE;
+
+ /* constant voltage is "topping off" */
+ if (value & LTC3350_CHRG_CV)
+ return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+
+ /* input limiter */
+ if (value & LTC3350_CHRG_INPUT_ILIM)
+ return POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE;
+
+ /* constant current is "fast" */
+ if (value & LTC3350_CHRG_CI)
+ return POWER_SUPPLY_CHARGE_TYPE_FAST;
+
+ return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+}
+
+static int ltc3350_get_charge_type(struct ltc3350_info *info, union power_supply_propval *val)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(info->regmap, LTC3350_REG_CHRG_STATUS, &regval);
+ if (ret)
+ return ret;
+
+ val->intval = ltc3350_charge_status_decode(regval);
+
+ return 0;
+}
+
+static int ltc3350_get_online(struct ltc3350_info *info, union power_supply_propval *val)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(info->regmap, LTC3350_REG_MON_STATUS, &regval);
+ if (ret)
+ return ret;
+
+ /* indicates if input voltage is sufficient to charge */
+ val->intval = !!(regval & LTC3350_MON_POWER_RETURNED);
+
+ return 0;
+}
+
+static int ltc3350_get_input_voltage(struct ltc3350_info *info, union power_supply_propval *val)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(info->regmap, LTC3350_REG_MEAS_VIN, &regval);
+ if (ret)
+ return ret;
+
+ /* 2.21mV/LSB */
+ val->intval = regval * 2210;
+
+ return 0;
+}
+
+static int ltc3350_get_input_current(struct ltc3350_info *info, union power_supply_propval *val)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(info->regmap, LTC3350_REG_MEAS_IIN, &regval);
+ if (ret)
+ return ret;
+
+ /* 1.983µV/RSNSI amperes per LSB */
+ ret = regval * 19830;
+ ret /= info->rsnsi;
+ ret *= 100;
+
+ val->intval = ret;
+
+ return 0;
+}
+
+static int ltc3350_get_icharge(struct ltc3350_info *info, union power_supply_propval *val)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(info->regmap, LTC3350_REG_MEAS_ICHG, &regval);
+ if (ret)
+ return ret;
+
+ /* 1.983µV/RSNSC amperes per LSB */
+ ret = regval * 19830;
+ ret /= info->rsnsc;
+ ret *= 100;
+
+ val->intval = ret;
+
+ return 0;
+}
+
+static int ltc3350_get_icharge_max(struct ltc3350_info *info, union power_supply_propval *val)
+{
+ /* I_CHG(MAX) = 32mV / RSNSC (Ampere) */
+ val->intval = 3200000000U / (info->rsnsc / 10);
+
+ return 0;
+}
+
+static int ltc3350_get_iin_max(struct ltc3350_info *info, union power_supply_propval *val)
+{
+ /* I_IN(MAX) = 32mV / RSNSI (Ampere) */
+ val->intval = 3200000000U / (info->rsnsi / 10);
+
+ return 0;
+}
+
+
+static int ltc3350_get_die_temp(struct ltc3350_info *info, unsigned int reg,
+ union power_supply_propval *val)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(info->regmap, reg, &regval);
+ if (ret)
+ return ret;
+
+ /* 0.028°C per LSB – 251.4°C */
+ ret = 280 * regval;
+ ret /= 100; /* Centidegrees scale */
+ ret -= 25140;
+ val->intval = ret;
+
+ return 0;
+}
+
+static int ltc3350_set_die_temp(struct ltc3350_info *info, unsigned int reg, int val)
+{
+ unsigned int regval;
+ int ret;
+
+ /* 0.028°C per LSB – 251.4°C */
+ regval = val + 25140;
+ regval *= 100;
+ regval /= 280;
+
+ ret = regmap_write(info->regmap, reg, regval);
+ if (ret)
+ return ret;
+
+ ltc3350_enable_alarm(info, reg);
+ return 0;
+}
+
+/* Custom properties */
+
+static ssize_t ltc3350_attr_show(struct device *dev,
+ struct device_attribute *attr, char *buf,
+ unsigned int reg, unsigned int scale)
+{
+ struct power_supply *psy = to_power_supply(dev);
+ struct ltc3350_info *info = power_supply_get_drvdata(psy);
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(info->regmap, reg, &regval);
+ if (ret)
+ return ret;
+
+ regval *= scale; /* Scale is in 10 μV units */
+ regval /= 10;
+
+ return sprintf(buf, "%u\n", regval);
+}
+
+static ssize_t ltc3350_attr_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count,
+ unsigned int reg, unsigned int scale)
+{
+ struct power_supply *psy = to_power_supply(dev);
+ struct ltc3350_info *info = power_supply_get_drvdata(psy);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ val *= 10;
+ val = DIV_ROUND_CLOSEST(val, scale); /* Scale is in 10 μV units */
+
+ ret = regmap_write(info->regmap, reg, val);
+ if (ret)
+ return ret;
+
+ /* When writing to one of the LVL registers, update the alarm mask */
+ if (reg >= LTC3350_REG_CAP_UV_LVL && reg <= LTC3350_REG_CAP_LO_LVL)
+ ltc3350_enable_alarm(info, reg);
+
+ return count;
+}
+
+#define LTC3350_DEVICE_ATTR_RO(_name, _reg, _scale) \
+static ssize_t _name##_show(struct device *dev, struct device_attribute *attr, \
+ char *buf) \
+{ \
+ return ltc3350_attr_show(dev, attr, buf, _reg, _scale); \
+} \
+static DEVICE_ATTR_RO(_name)
+
+#define LTC3350_DEVICE_ATTR_RW(_name, _reg, _scale) \
+static ssize_t _name##_show(struct device *dev, struct device_attribute *attr, \
+ char *buf) \
+{ \
+ return ltc3350_attr_show(dev, attr, buf, _reg, _scale); \
+} \
+static ssize_t _name##_store(struct device *dev, struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ return ltc3350_attr_store(dev, attr, buf, count, _reg, _scale); \
+} \
+static DEVICE_ATTR_RW(_name)
+
+/* Shunt voltage, 183.5μV per LSB */
+LTC3350_DEVICE_ATTR_RW(vshunt, LTC3350_REG_VSHUNT, 1835);
+
+/* Single capacitor voltages, 183.5μV per LSB */
+LTC3350_DEVICE_ATTR_RO(vcap1, LTC3350_REG_MEAS_VCAP1, 1835);
+LTC3350_DEVICE_ATTR_RO(vcap2, LTC3350_REG_MEAS_VCAP2, 1835);
+LTC3350_DEVICE_ATTR_RO(vcap3, LTC3350_REG_MEAS_VCAP3, 1835);
+LTC3350_DEVICE_ATTR_RO(vcap4, LTC3350_REG_MEAS_VCAP4, 1835);
+LTC3350_DEVICE_ATTR_RW(cap_uv, LTC3350_REG_CAP_UV_LVL, 1835);
+LTC3350_DEVICE_ATTR_RW(cap_ov, LTC3350_REG_CAP_OV_LVL, 1835);
+
+/* General purpose input, 183.5μV per LSB */
+LTC3350_DEVICE_ATTR_RO(gpi, LTC3350_REG_MEAS_GPI, 1835);
+LTC3350_DEVICE_ATTR_RW(gpi_uv, LTC3350_REG_GPI_UV_LVL, 1835);
+LTC3350_DEVICE_ATTR_RW(gpi_ov, LTC3350_REG_GPI_OV_LVL, 1835);
+
+/* Input voltage, 2.21mV per LSB */
+LTC3350_DEVICE_ATTR_RO(vin, LTC3350_REG_MEAS_VIN, 22100);
+LTC3350_DEVICE_ATTR_RW(vin_uv, LTC3350_REG_VIN_UV_LVL, 22100);
+LTC3350_DEVICE_ATTR_RW(vin_ov, LTC3350_REG_VIN_OV_LVL, 22100);
+
+/* Capacitor stack voltage, 1.476 mV per LSB */
+LTC3350_DEVICE_ATTR_RO(vcap, LTC3350_REG_MEAS_VCAP, 14760);
+LTC3350_DEVICE_ATTR_RW(vcap_uv, LTC3350_REG_VCAP_UV_LVL, 14760);
+LTC3350_DEVICE_ATTR_RW(vcap_ov, LTC3350_REG_VCAP_OV_LVL, 14760);
+
+/* Output, 2.21mV per LSB */
+LTC3350_DEVICE_ATTR_RO(vout, LTC3350_REG_MEAS_VOUT, 22100);
+LTC3350_DEVICE_ATTR_RW(vout_uv, LTC3350_REG_VOUT_UV_LVL, 22100);
+LTC3350_DEVICE_ATTR_RW(vout_ov, LTC3350_REG_VOUT_OV_LVL, 22100);
+
+static ssize_t num_caps_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct power_supply *psy = to_power_supply(dev);
+ struct ltc3350_info *info = power_supply_get_drvdata(psy);
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(info->regmap, LTC3350_REG_NUM_CAPS, &regval);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "%u\n", regval + 1);
+}
+static DEVICE_ATTR_RO(num_caps);
+
+static ssize_t charge_status_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct power_supply *psy = to_power_supply(dev);
+ struct ltc3350_info *info = power_supply_get_drvdata(psy);
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(info->regmap, LTC3350_REG_CHRG_STATUS, &regval);
+ if (ret)
+ return ret;
+
+ return sprintf(buf, "0x%x\n", regval);
+}
+static DEVICE_ATTR_RO(charge_status);
+
+static struct attribute *ltc3350_sysfs_entries[] = {
+ &dev_attr_vshunt.attr,
+ &dev_attr_vcap1.attr,
+ &dev_attr_vcap2.attr,
+ &dev_attr_vcap3.attr,
+ &dev_attr_vcap4.attr,
+ &dev_attr_cap_uv.attr,
+ &dev_attr_cap_ov.attr,
+ &dev_attr_gpi.attr,
+ &dev_attr_gpi_uv.attr,
+ &dev_attr_gpi_ov.attr,
+ &dev_attr_vin.attr,
+ &dev_attr_vin_uv.attr,
+ &dev_attr_vin_ov.attr,
+ &dev_attr_vcap.attr,
+ &dev_attr_vcap_uv.attr,
+ &dev_attr_vcap_ov.attr,
+ &dev_attr_vout.attr,
+ &dev_attr_vout_uv.attr,
+ &dev_attr_vout_ov.attr,
+ &dev_attr_num_caps.attr,
+ &dev_attr_charge_status.attr,
+ NULL,
+};
+
+static const struct attribute_group ltc3350_attr_group = {
+ .name = NULL, /* put in device directory */
+ .attrs = ltc3350_sysfs_entries,
+};
+
+static const struct attribute_group *ltc3350_attr_groups[] = {
+ &ltc3350_attr_group,
+ NULL,
+};
+
+static int ltc3350_get_property(struct power_supply *psy, enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct ltc3350_info *info = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ return ltc3350_get_status(info, val);
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ return ltc3350_get_charge_type(info, val);
+ case POWER_SUPPLY_PROP_ONLINE:
+ return ltc3350_get_online(info, val);
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ return ltc3350_get_input_voltage(info, val);
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ return ltc3350_get_input_current(info, val);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ return ltc3350_get_icharge(info, val);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ return ltc3350_get_icharge_max(info, val);
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ return ltc3350_get_iin_max(info, val);
+ case POWER_SUPPLY_PROP_TEMP:
+ return ltc3350_get_die_temp(info, LTC3350_REG_MEAS_DTEMP, val);
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
+ return ltc3350_get_die_temp(info, LTC3350_REG_DTEMP_COLD_LVL, val);
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ return ltc3350_get_die_temp(info, LTC3350_REG_DTEMP_HOT_LVL, val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ltc3350_set_property(struct power_supply *psy, enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct ltc3350_info *info = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
+ return ltc3350_set_die_temp(info, LTC3350_REG_DTEMP_COLD_LVL, val->intval);
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ return ltc3350_set_die_temp(info, LTC3350_REG_DTEMP_HOT_LVL, val->intval);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ltc3350_property_is_writeable(struct power_supply *psy, enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+/* Charger power supply property routines */
+static enum power_supply_property ltc3350_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TEMP_ALERT_MIN,
+ POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
+};
+
+static const struct power_supply_desc ltc3350_desc = {
+ .name = "ltc3350",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = ltc3350_properties,
+ .num_properties = ARRAY_SIZE(ltc3350_properties),
+ .get_property = ltc3350_get_property,
+ .set_property = ltc3350_set_property,
+ .property_is_writeable = ltc3350_property_is_writeable,
+};
+
+static bool ltc3350_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+ /* all registers up to this one are writeable */
+ return reg < LTC3350_REG_NUM_CAPS;
+}
+
+static bool ltc3350_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ /* read-only status registers and self-clearing register */
+ return reg > LTC3350_REG_NUM_CAPS || reg == LTC3350_REG_CLR_ALARMS;
+}
+
+static const struct regmap_config ltc3350_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+ .writeable_reg = ltc3350_is_writeable_reg,
+ .volatile_reg = ltc3350_is_volatile_reg,
+ .max_register = LTC3350_REG_MEAS_DTEMP,
+ .cache_type = REGCACHE_MAPLE,
+};
+
+static int ltc3350_probe(struct i2c_client *client)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ struct device *dev = &client->dev;
+ struct ltc3350_info *info;
+ struct power_supply_config ltc3350_config = {};
+ int ret;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
+ dev_err(dev, "No support for SMBUS_WORD_DATA\n");
+ return -ENODEV;
+ }
+ info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->client = client;
+ i2c_set_clientdata(client, info);
+
+ info->regmap = devm_regmap_init_i2c(client, &ltc3350_regmap_config);
+ if (IS_ERR(info->regmap)) {
+ dev_err(dev, "Failed to initialize register map\n");
+ return PTR_ERR(info->regmap);
+ }
+
+ ret = device_property_read_u32(dev, "lltc,rsnsc-micro-ohms",
+ &info->rsnsc);
+ if (ret) {
+ dev_err(dev, "Missing lltc,rsnsc-micro-ohms property\n");
+ return ret;
+ }
+ if (!info->rsnsc)
+ return -EINVAL;
+
+ ret = device_property_read_u32(dev, "lltc,rsnsi-micro-ohms",
+ &info->rsnsi);
+ if (ret) {
+ dev_err(dev, "Missing lltc,rsnsi-micro-ohms property\n");
+ return ret;
+ }
+ if (!info->rsnsi)
+ return -EINVAL;
+
+ /* Clear and disable all interrupt sources*/
+ ret = regmap_write(info->regmap, LTC3350_REG_CLR_ALARMS, 0xFFFF);
+ if (ret) {
+ dev_err(dev, "Failed to write configuration\n");
+ return ret;
+ }
+ regmap_write(info->regmap, LTC3350_REG_MSK_ALARMS, 0);
+ regmap_write(info->regmap, LTC3350_REG_MSK_MON_STATUS, 0);
+
+ ltc3350_config.of_node = dev->of_node;
+ ltc3350_config.drv_data = info;
+ ltc3350_config.attr_grp = ltc3350_attr_groups;
+
+ info->charger = devm_power_supply_register(dev, &ltc3350_desc,
+ &ltc3350_config);
+ if (IS_ERR(info->charger)) {
+ dev_err(dev, "Failed to register charger\n");
+ return PTR_ERR(info->charger);
+ }
+
+ /* Enable interrupts on status changes */
+ regmap_write(info->regmap, LTC3350_REG_MSK_MON_STATUS,
+ LTC3350_MON_POWER_FAILED | LTC3350_MON_POWER_RETURNED);
+
+ return 0;
+}
+
+static void ltc3350_alert(struct i2c_client *client, enum i2c_alert_protocol type,
+ unsigned int flag)
+{
+ struct ltc3350_info *info = i2c_get_clientdata(client);
+
+ if (type != I2C_PROTOCOL_SMBUS_ALERT)
+ return;
+
+ power_supply_changed(info->charger);
+}
+
+static const struct i2c_device_id ltc3350_i2c_id_table[] = {
+ { "ltc3350", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, ltc3350_i2c_id_table);
+
+static const struct of_device_id ltc3350_of_match[] = {
+ { .compatible = "lltc,ltc3350", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ltc3350_of_match);
+
+static struct i2c_driver ltc3350_driver = {
+ .probe = ltc3350_probe,
+ .alert = ltc3350_alert,
+ .id_table = ltc3350_i2c_id_table,
+ .driver = {
+ .name = "ltc3350-charger",
+ .of_match_table = of_match_ptr(ltc3350_of_match),
+ },
+};
+module_i2c_driver(ltc3350_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Looijmans <mike.looijmans@xxxxxxxx>");
+MODULE_DESCRIPTION("LTC3350 charger driver");
--
2.34.1


Met vriendelijke groet / kind regards,

Mike Looijmans
System Expert


TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands

T: +31 (0) 499 33 69 69
E: mike.looijmans@xxxxxxxx
W: www.topic.nl

Please consider the environment before printing this e-mail