[PATCH 2/5] clk: qcom: apss-ipq-pll: use an 1-D array for Huayra pll register offsets

[Gabor Juhos]

The 'ipq_pll_offsets' is defined as a two-dimensional array, but it
contains a sole element only so convert it to an one-dimensional
array. Also, rename the variable to better reflect that it is used
for the Huayra PLLs.

No functional changes.

Signed-off-by: Gabor Juhos <j4g8y7@xxxxxxxxx>
---
 drivers/clk/qcom/apss-ipq-pll.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index ed3e6405f99cb..f5c7eaf8db374 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -13,22 +13,20 @@
  * are different from the one mentioned in the clk-alpha-pll.c, since the
  * PLL is specific to APSS, so lets the define the same.
  */
-static const u8 ipq_pll_offsets[][PLL_OFF_MAX_REGS] = {
-	[CLK_ALPHA_PLL_TYPE_HUAYRA] =  {
-		[PLL_OFF_L_VAL] = 0x08,
-		[PLL_OFF_ALPHA_VAL] = 0x10,
-		[PLL_OFF_USER_CTL] = 0x18,
-		[PLL_OFF_CONFIG_CTL] = 0x20,
-		[PLL_OFF_CONFIG_CTL_U] = 0x24,
-		[PLL_OFF_STATUS] = 0x28,
-		[PLL_OFF_TEST_CTL] = 0x30,
-		[PLL_OFF_TEST_CTL_U] = 0x34,
-	},
+static const u8 ipq_pll_huayra_regs[PLL_OFF_MAX_REGS] = {
+	[PLL_OFF_L_VAL] = 0x08,
+	[PLL_OFF_ALPHA_VAL] = 0x10,
+	[PLL_OFF_USER_CTL] = 0x18,
+	[PLL_OFF_CONFIG_CTL] = 0x20,
+	[PLL_OFF_CONFIG_CTL_U] = 0x24,
+	[PLL_OFF_STATUS] = 0x28,
+	[PLL_OFF_TEST_CTL] = 0x30,
+	[PLL_OFF_TEST_CTL_U] = 0x34,
 };
 
 static struct clk_alpha_pll ipq_pll_huayra = {
 	.offset = 0x0,
-	.regs = ipq_pll_offsets[CLK_ALPHA_PLL_TYPE_HUAYRA],
+	.regs = ipq_pll_huayra_regs,
 	.flags = SUPPORTS_DYNAMIC_UPDATE,
 	.clkr = {
 		.enable_reg = 0x0,

-- 
2.44.0