Re: [RFC PATCH 05/20] dev_dax_iomap: Add dax_operations for use by fs-dax on devdax

[Jonathan Cameron]

On Fri, 23 Feb 2024 11:41:49 -0600
John Groves <John@xxxxxxxxxx> wrote:

> Notes about this commit:
> 
> * These methods are based somewhat loosely on pmem_dax_ops from
>   drivers/nvdimm/pmem.c
> 
> * dev_dax_direct_access() is returns the hpa, pfn and kva. The kva was
>   newly stored as dev_dax->virt_addr by dev_dax_probe().
> 
> * The hpa/pfn are used for mmap (dax_iomap_fault()), and the kva is used
>   for read/write (dax_iomap_rw())
> 
> * dev_dax_recovery_write() and dev_dax_zero_page_range() have not been
>   tested yet. I'm looking for suggestions as to how to test those.
> 
> Signed-off-by: John Groves <john@xxxxxxxxxx>
> ---
>  drivers/dax/bus.c | 107 ++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 107 insertions(+)
> 
> diff --git a/drivers/dax/bus.c b/drivers/dax/bus.c
> index 664e8c1b9930..06fcda810674 100644
> --- a/drivers/dax/bus.c
> +++ b/drivers/dax/bus.c
> @@ -10,6 +10,12 @@
>  #include "dax-private.h"
>  #include "bus.h"
>  
> +#if IS_ENABLED(CONFIG_DEV_DAX_IOMAP)
> +#include <linux/backing-dev.h>
> +#include <linux/pfn_t.h>
> +#include <linux/range.h>
> +#endif
> +

Is it worth avoiding includes based on config? Probably not.

>  static DEFINE_MUTEX(dax_bus_lock);
>  
>  #define DAX_NAME_LEN 30
> @@ -1349,6 +1355,101 @@ __weak phys_addr_t dax_pgoff_to_phys(struct dev_dax *dev_dax, pgoff_t pgoff,
>  }
>  EXPORT_SYMBOL_GPL(dax_pgoff_to_phys);
>  
> +#if IS_ENABLED(CONFIG_DEV_DAX_IOMAP)
> +

> +
> +static long __dev_dax_direct_access(struct dax_device *dax_dev, pgoff_t pgoff,
> +			     long nr_pages, enum dax_access_mode mode, void **kaddr,
> +			     pfn_t *pfn)
> +{
> +	struct dev_dax *dev_dax = dax_get_private(dax_dev);
> +	size_t dax_size = dev_dax_size(dev_dax);
> +	size_t size = nr_pages << PAGE_SHIFT;
> +	size_t offset = pgoff << PAGE_SHIFT;
> +	phys_addr_t phys;
> +	u64 virt_addr = dev_dax->virt_addr + offset;
> +	pfn_t local_pfn;
> +	u64 flags = PFN_DEV|PFN_MAP;
> +
> +	WARN_ON(!dev_dax->virt_addr); /* virt_addr must be saved for direct_access */
Fair enough, but from local code point of view, does it make sense to check this
if !kaddr as we won't use this.
> +
> +	phys = dax_pgoff_to_phys(dev_dax, pgoff, nr_pages << PAGE_SHIFT);
> +
> +	if (kaddr)
> +		*kaddr = (void *)virt_addr;

Back to earlier comment on virt_addr as a void *. Definitely looking like
that would be more accurate and simpler!  Also not much point in computing
virt_addr unless kaddr is good.

> +
> +	local_pfn = phys_to_pfn_t(phys, flags); /* are flags correct? */
If you aren't going to do anything with it for !pfn, move it under the if (pfn).

> +	if (pfn)
> +		*pfn = local_pfn;
> +
> +	/* This the valid size at the specified address */
> +	return PHYS_PFN(min_t(size_t, size, dax_size - offset));
> +}
> +

> +
> +static const struct dax_operations dev_dax_ops = {
> +	.direct_access = dev_dax_direct_access,
> +	.zero_page_range = dev_dax_zero_page_range,
> +	.recovery_write = dev_dax_recovery_write,
> +};
> +
> +#endif /* IS_ENABLED(CONFIG_DEV_DAX_IOMAP) */
> +
>  struct dev_dax *devm_create_dev_dax(struct dev_dax_data *data)
>  {
>  	struct dax_region *dax_region = data->dax_region;
> @@ -1404,11 +1505,17 @@ struct dev_dax *devm_create_dev_dax(struct dev_dax_data *data)
>  		}
>  	}
>  

If we were to make this 

	if (IS_ENABLED(CONFIG_DEV_DAX_IOMAP))

etc can we avoid the ifdef stuff above and let dead code removal deal with it?
Might need a few stubs - I haven't tried.

> +#if IS_ENABLED(CONFIG_DEV_DAX_IOMAP)
> +	/* holder_ops currently populated separately in a slightly hacky way */
> +	dax_dev = alloc_dax(dev_dax, &dev_dax_ops);
> +#else
>  	/*
>  	 * No dax_operations since there is no access to this device outside of
>  	 * mmap of the resulting character device.
>  	 */
>  	dax_dev = alloc_dax(dev_dax, NULL);
> +#endif
> +
>  	if (IS_ERR(dax_dev)) {
>  		rc = PTR_ERR(dax_dev);
>  		goto err_alloc_dax;