[PATCH net-next v3 2/7] dma: avoid redundant calls for sync operations
From: Alexander Lobakin
Date: Wed Feb 14 2024 - 11:23:52 EST
Quite often, devices do not need dma_sync operations on x86_64 at least.
Indeed, when dev_is_dma_coherent(dev) is true and
dev_use_swiotlb(dev) is false, iommu_dma_sync_single_for_cpu()
and friends do nothing.
However, indirectly calling them when CONFIG_RETPOLINE=y consumes about
10% of cycles on a cpu receiving packets from softirq at ~100Gbit rate.
Even if/when CONFIG_RETPOLINE is not set, there is a cost of about 3%.
Add dev->skip_dma_sync boolean which is set during the device
initialization depending on the setup: dev_is_dma_coherent() for the
direct DMA, !(sync_single_for_device || sync_single_for_cpu) or the new
dma_map_ops flag, %DMA_F_CAN_SKIP_SYNC, advertised for non-NULL DMA ops.
Then later, if/when swiotlb is used for the first time, the flag
is turned off, from swiotlb_tbl_map_single().
On iavf, the UDP trafficgen with XDP_DROP in skb mode test shows
+3-5% increase for direct DMA.
Suggested-by: Christoph Hellwig <hch@xxxxxx> # direct DMA shortcut
Co-developed-by: Eric Dumazet <edumazet@xxxxxxxxxx>
Signed-off-by: Eric Dumazet <edumazet@xxxxxxxxxx>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@xxxxxxxxx>
---
include/linux/device.h | 5 +++++
include/linux/dma-map-ops.h | 21 ++++++++++++++++++++
include/linux/dma-mapping.h | 6 +++++-
drivers/base/dd.c | 2 ++
kernel/dma/mapping.c | 39 ++++++++++++++++++++++++++++++++++++-
kernel/dma/swiotlb.c | 8 ++++++++
6 files changed, 79 insertions(+), 2 deletions(-)
diff --git a/include/linux/device.h b/include/linux/device.h
index 97c4b046c09d..f23e6a32bea0 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -686,6 +686,8 @@ struct device_physical_location {
* other devices probe successfully.
* @dma_coherent: this particular device is dma coherent, even if the
* architecture supports non-coherent devices.
+ * @dma_skip_sync: DMA sync operations can be skipped for coherent non-SWIOTLB
+ * buffers.
* @dma_ops_bypass: If set to %true then the dma_ops are bypassed for the
* streaming DMA operations (->map_* / ->unmap_* / ->sync_*),
* and optionall (if the coherent mask is large enough) also
@@ -800,6 +802,9 @@ struct device {
defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL)
bool dma_coherent:1;
#endif
+#ifdef CONFIG_DMA_NEED_SYNC
+ bool dma_skip_sync:1;
+#endif
#ifdef CONFIG_DMA_OPS_BYPASS
bool dma_ops_bypass : 1;
#endif
diff --git a/include/linux/dma-map-ops.h b/include/linux/dma-map-ops.h
index 4abc60f04209..327b73f653ad 100644
--- a/include/linux/dma-map-ops.h
+++ b/include/linux/dma-map-ops.h
@@ -18,8 +18,11 @@ struct iommu_ops;
*
* DMA_F_PCI_P2PDMA_SUPPORTED: Indicates the dma_map_ops implementation can
* handle PCI P2PDMA pages in the map_sg/unmap_sg operation.
+ * DMA_F_CAN_SKIP_SYNC: DMA sync operations can be skipped if the device is
+ * coherent and it's not an SWIOTLB buffer.
*/
#define DMA_F_PCI_P2PDMA_SUPPORTED (1 << 0)
+#define DMA_F_CAN_SKIP_SYNC BIT(1)
struct dma_map_ops {
unsigned int flags;
@@ -111,6 +114,24 @@ static inline void set_dma_ops(struct device *dev,
}
#endif /* CONFIG_DMA_OPS */
+#ifdef CONFIG_DMA_NEED_SYNC
+void dma_setup_skip_sync(struct device *dev);
+
+static inline void dma_clear_skip_sync(struct device *dev)
+{
+ /* Clear it only once so that the function can be called on hotpath */
+ if (unlikely(dev->dma_skip_sync))
+ dev->dma_skip_sync = false;
+}
+#else /* !CONFIG_DMA_NEED_SYNC */
+static inline void dma_setup_skip_sync(struct device *dev)
+{
+}
+static inline void dma_clear_skip_sync(struct device *dev)
+{
+}
+#endif /* !CONFIG_DMA_NEED_SYNC */
+
#ifdef CONFIG_DMA_CMA
extern struct cma *dma_contiguous_default_area;
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index 6c7640441214..d85ae541c267 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -364,7 +364,11 @@ static inline void __dma_sync_single_range_for_device(struct device *dev,
static inline bool dma_skip_sync(const struct device *dev)
{
- return !IS_ENABLED(CONFIG_DMA_NEED_SYNC);
+#ifdef CONFIG_DMA_NEED_SYNC
+ return dev->dma_skip_sync;
+#else
+ return true;
+#endif
}
static inline bool dma_need_sync(struct device *dev, dma_addr_t dma_addr)
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 85152537dbf1..67ad3e1d51f6 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -642,6 +642,8 @@ static int really_probe(struct device *dev, struct device_driver *drv)
goto pinctrl_bind_failed;
}
+ dma_setup_skip_sync(dev);
+
ret = driver_sysfs_add(dev);
if (ret) {
pr_err("%s: driver_sysfs_add(%s) failed\n",
diff --git a/kernel/dma/mapping.c b/kernel/dma/mapping.c
index 85feaa0e008c..5f588e31ea89 100644
--- a/kernel/dma/mapping.c
+++ b/kernel/dma/mapping.c
@@ -846,8 +846,14 @@ bool __dma_need_sync(struct device *dev, dma_addr_t dma_addr)
const struct dma_map_ops *ops = get_dma_ops(dev);
if (dma_map_direct(dev, ops))
+ /*
+ * dma_skip_sync could've been set to false on first SWIOTLB
+ * buffer mapping, but @dma_addr is not necessary an SWIOTLB
+ * buffer. In this case, fall back to more granular check.
+ */
return dma_direct_need_sync(dev, dma_addr);
- return ops->sync_single_for_cpu || ops->sync_single_for_device;
+
+ return true;
}
EXPORT_SYMBOL_GPL(__dma_need_sync);
@@ -861,3 +867,34 @@ unsigned long dma_get_merge_boundary(struct device *dev)
return ops->get_merge_boundary(dev);
}
EXPORT_SYMBOL_GPL(dma_get_merge_boundary);
+
+#ifdef CONFIG_DMA_NEED_SYNC
+void dma_setup_skip_sync(struct device *dev)
+{
+ const struct dma_map_ops *ops = get_dma_ops(dev);
+
+ if (dma_map_direct(dev, ops))
+ /*
+ * dma_skip_sync will be set to false on first SWIOTLB buffer
+ * mapping, if any. During the device initialization, it's
+ * enough to check only for DMA coherence.
+ */
+ dev->dma_skip_sync = dev_is_dma_coherent(dev);
+ else if (!ops->sync_single_for_device && !ops->sync_single_for_cpu)
+ /*
+ * Synchronization is not possible when none of DMA sync ops
+ * is set. This check precedes the below one as it disables
+ * the synchronization unconditionally.
+ */
+ dev->dma_skip_sync = true;
+ else if (ops->flags & DMA_F_CAN_SKIP_SYNC)
+ /*
+ * Assume that when ``DMA_F_CAN_SKIP_SYNC`` is advertised,
+ * the conditions for synchronizing are the same as with
+ * the direct DMA.
+ */
+ dev->dma_skip_sync = dev_is_dma_coherent(dev);
+ else
+ dev->dma_skip_sync = false;
+}
+#endif /* CONFIG_DMA_NEED_SYNC */
diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c
index b079a9a8e087..0b737eab4d48 100644
--- a/kernel/dma/swiotlb.c
+++ b/kernel/dma/swiotlb.c
@@ -1323,6 +1323,12 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr,
return (phys_addr_t)DMA_MAPPING_ERROR;
}
+ /*
+ * If dma_skip_sync was set, reset it to false on first SWIOTLB buffer
+ * mapping to always sync SWIOTLB buffers.
+ */
+ dma_clear_skip_sync(dev);
+
/*
* Save away the mapping from the original address to the DMA address.
* This is needed when we sync the memory. Then we sync the buffer if
@@ -1640,6 +1646,8 @@ struct page *swiotlb_alloc(struct device *dev, size_t size)
if (index == -1)
return NULL;
+ dma_clear_skip_sync(dev);
+
tlb_addr = slot_addr(pool->start, index);
return pfn_to_page(PFN_DOWN(tlb_addr));
--
2.43.0