Re: [PATCH v4 02/11] timekeeping: Add function to convert realtime to base clock

[Thomas Gleixner]

On Wed, Feb 07 2024 at 11:38, lakshmi sowjanya d. wrote:
> From: Lakshmi Sowjanya D <lakshmi.sowjanya.d@xxxxxxxxx>
>
> Introduce an interface, ktime_real_to_base_clock() to convert realtime
> to base clock.
>
> Convert the base clock to the system clock using convert_base_to_cs() in
> get_device_system_crosststamp().
>
> Add the helper function timekeeping_clocksource_has_base(), to check
> whether the current clocksource has the same base clock.

Neither ktime_real_to_base_clock() nor
timekeeping_clocksource_has_base() are used anywhere.

What's the point of having them in the first place?

Your changelog explains the WHAT but not the WHY....

> +static bool convert_clock(u64 *val, u32 numerator, u32 denominator)
> +{
> +	u64 rem, res;
> +
> +	if (numerator == 0 || denominator == 0)
> +		return false;

What's wrong with the usual (!numerator || !denominator) notation?

> +
> +	res = div64_u64_rem(*val, denominator, &rem) * numerator;
> +	*val = res + div_u64(rem * numerator, denominator);
> +	return true;
> +}
> +
> +static bool convert_base_to_cs(struct system_counterval_t *scv)
> +{
> +	struct clocksource *cs = tk_core.timekeeper.tkr_mono.clock;
> +	struct clocksource_base *base = cs->base;
> +
> +	/* The timestamp was taken from the time keeper clock source */
> +	if (cs->id == scv->cs_id)
> +		return true;
> +
> +	/* Check whether cs_id matches the base clock */
> +	if (!base || base->id != scv->cs_id)
> +		return false;
> +
> +	/* Avoid conversion to a less precise clock */
> +	if (scv->nsecs && cs->freq_khz != 0 && base->freq_khz < cs->freq_khz) {
> +		if (!convert_clock(&scv->cycles, cs->freq_khz, USEC_PER_SEC))
> +			return false;
> +	} else {
> +		if (scv->nsecs) {
> +			if (!convert_clock(&scv->cycles, base->freq_khz, USEC_PER_SEC))
> +				return false;
> +		}
> +		if (!convert_clock(&scv->cycles, base->numerator, base->denominator))
> +			return false;
> +	}

The above logic makes my brain hurt.

It's a reaonable requirement that cs->freq must be != 0 when sc->base !=
NULL and then converting from nanoseconds can always use cs->freq no
matter what the value of the base frequency is. Even for the case where
the base frequency is larger than cs->freq because the double conversion
does not give you more precision, right?

> +	scv->cycles += base->offset;

So the whole thing can be reduced to:

   nom = scv->nsecs ? cs->freq_khz : base->numerator;
   den = scv->nsecs ? USEC_PER_SEC : base->denominator;

   convert(&scv->cycles, nom, den);
   scv->cycles += base->offset;

Thanks,

        tglx