[PATCH v2 3/6] arm64: dts: qcom: sc8180x-lenovo-flex-5g: move pinctrl to appropriate nodes

[Anton Bambura]

Split keyboard and touchpad pinctrl nodes since they are for different
devices and move keyboard, touchpad and touchscreen pinctrl references to
appropriate nodes.

Signed-off-by: Anton Bambura <jenneron@xxxxxxxxxxxxxxxx>
---
 .../boot/dts/qcom/sc8180x-lenovo-flex-5g.dts  | 41 +++++++++++++------
 1 file changed, 29 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
index af61acf58d68..6ae6cb030b70 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -357,7 +357,7 @@ zap-shader {
 &i2c1 {
 	clock-frequency = <100000>;
 
-	pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>;
+	pinctrl-0 = <&i2c1_active>;
 	pinctrl-names = "default";
 
 	status = "okay";
@@ -368,13 +368,16 @@ touchscreen@10 {
 		hid-descr-addr = <0x1>;
 
 		interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts_int_default>;
+		pinctrl-names = "default";
 	};
 };
 
 &i2c7 {
 	clock-frequency = <100000>;
 
-	pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>;
+	pinctrl-0 = <&i2c7_active>;
 	pinctrl-names = "default";
 
 	status = "okay";
@@ -385,6 +388,9 @@ keyboard@5 {
 		hid-descr-addr = <0x20>;
 
 		interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kb_int_default>;
+		pinctrl-names = "default";
 	};
 
 	touchpad@2c {
@@ -393,6 +399,9 @@ touchpad@2c {
 		hid-descr-addr = <0x20>;
 
 		interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tp_int_default>;
+		pinctrl-names = "default";
 	};
 };
 
@@ -669,14 +678,6 @@ i2c1_active: i2c1-active-state {
 		drive-strength = <2>;
 	};
 
-	i2c1_hid_active: i2c1-hid-active-state {
-		pins = "gpio122";
-		function = "gpio";
-
-		bias-pull-up;
-		drive-strength = <2>;
-	};
-
 	i2c7_active: i2c7-active-state {
 		pins = "gpio98", "gpio99";
 		function = "qup7";
@@ -685,8 +686,8 @@ i2c7_active: i2c7-active-state {
 		drive-strength = <2>;
 	};
 
-	i2c7_hid_active: i2c7-hid-active-state {
-		pins = "gpio37", "gpio24";
+	kb_int_default: kb-int-default-state {
+		pins = "gpio37";
 		function = "gpio";
 
 		bias-pull-up;
@@ -718,6 +719,22 @@ wake-n-pins {
 		};
 	};
 
+	tp_int_default: tp-int-default-state {
+		pins = "gpio24";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio122";
+		function = "gpio";
+
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+
 	usbprim_sbu_default: usbprim-sbu-state {
 		oe-n-pins {
 			pins = "gpio152";
-- 
2.42.0