Re: [PATCH] fpga: dfl: afu: update initialization of port_hdr driver

From: Xu Yilun
Date: Wed Jan 31 2024 - 00:03:23 EST


On Tue, Jan 30, 2024 at 09:13:56AM -0800, matthew.gerlach@xxxxxxxxxxxxxxx wrote:
>
>
> On Tue, 30 Jan 2024, Xu Yilun wrote:
>
> > On Wed, Jan 24, 2024 at 11:40:05AM -0800, matthew.gerlach@xxxxxxxxxxxxxxx wrote:
> > >
> > >
> > > On Tue, 23 Jan 2024, Xu Yilun wrote:
> > >
> > > > On Mon, Jan 22, 2024 at 09:24:33AM -0800, Matthew Gerlach wrote:
> > > > > Revision 2 of the Device Feature List (DFL) Port feature has
> > > > > slightly different requirements than revision 1. Revision 2
> > > > > does not need the port to reset at driver startup. In fact,
> > > >
> > > > Please help illustrate what's the difference between Revision 1 & 2, and
> > > > why revision 2 needs not.
> > >
> > > I will update the commit message to clarify the differences between revision
> > > 1 and 2.
> > >
> > > >
> > > > > performing a port reset during driver initialization can cause
> > > > > driver race conditions when the port is connected to a different
> > > >
> > > > Please reorganize this part, in this description there seems be a
> > > > software racing bug and the patch is a workaround. But the fact is port
> > > > reset shouldn't been done for a new HW.
> > >
> > > Reorganizing the commit message a bit will help to clarify why port reset
> > > should not be performed during driver initialization with revision 2 of the
> > > hardware.
> > >
> > > >
> > > > BTW: Is there a way to tell whether the port is connected to a different
> > > > PF? Any guarantee that revision 3, 4 ... would need a port reset or not?
> > >
> > > The use of revision 2 of the port_hdr IP block indicates that the port can
> > > be connected multiple PFs, but there is nothing explicitly stating which PFs
> >
> > Sorry, I mean any specific indicator other than enumerate the revision
> > number? As you said below, checking revision number may not make further
> > things right, then you need to amend code each time.
>
> Using a revision number to indicate the level of functionality for a
> particular IP block seems to be a widely used approach. What other indicator

If you still want to make the existing driver work, some capability indication
would have more compatibility. That's more reasonable approach. Or you
need to change existing behavior for each new revision, that's not
actually widely used.

> of functionality level did you have in mind?

I'm not trying to make the design. You tell me.

If finally no indicator could be used, we have to use revision number. That's
OK but make SW work harder, so I'm asking if anything could be done to
avoid that.

>
> The revision number of an IP block would change when new functionality is
> added to an IP block or the behavior of the IP block changes. It would be
> expected that SW might need to change in order to use the new functionality
> or to handle the change in behavior of the IP block. Ideally the new
> revision of an IP block would be compatible with existing SW, but that
> cannot be guaranteed.

People make the IP block, and be compatible should be the concern if it
want upstream support.

Thanks,
Yilun

>
> Thanks,
> Matthew
>
> >
> > Thanks,
> > Yilun
> >
> > > the port is connected to.
> > >
> > > It is hard to predict the requirements and implementation of a future
> > > revision of an IP block. If a requirement of a future revision is to work
> > > with existing software, then the future revision would not require a port
> > > reset at driver initialization.
> > >
> >