[PATCH linux-next] drm/panel: samsung: Simplify with dev_err_probe()

[chenguanxi11234]

From: Chen Haonan <chen.haonan2@xxxxxxxxxx>

dev_err_probe() can check if the error code is -EPROBE_DEFER 
and can return the error code, replacing dev_err() with it 
simplifies the code.

Signed-off-by: Chen Haonan <chen.haonan2@xxxxxxxxxx>
---
 drivers/gpu/drm/panel/panel-samsung-s6d16d0.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c b/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c
index 79f611963c61..f4103e762b53 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c
@@ -194,10 +194,8 @@ static int s6d16d0_probe(struct mipi_dsi_device *dsi)
 	s6->reset_gpio = devm_gpiod_get_optional(dev, "reset",
 						GPIOD_OUT_HIGH);
 	if (IS_ERR(s6->reset_gpio)) {
-		ret = PTR_ERR(s6->reset_gpio);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "failed to request GPIO (%d)\n", ret);
-		return ret;
+		return dev_err_probe(dev, PTR_ERR(s6->reset_gpio),
+							 "failed to request GPIO\n");
 	}
 
 	drm_panel_init(&s6->panel, dev, &s6d16d0_drm_funcs,
-- 
2.25.1