[PATCH 13/18] serial: sc16is7xx: use in_range() for DT properties bound checks

[Hugo Villeneuve]

From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>

Improve code readability and efficiency by using in_range() when checking
device tree properties bound.

Suggested-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
---
 drivers/tty/serial/sc16is7xx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 133538f91390..29089b11f6f1 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -14,6 +14,7 @@
 #include <linux/device.h>
 #include <linux/gpio/driver.h>
 #include <linux/i2c.h>
+#include <linux/minmax.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/property.h>
@@ -1398,7 +1399,7 @@ static void sc16is7xx_setup_irda_ports(struct sc16is7xx_port *s)
 	struct device *dev = s->p[0].port.dev;
 
 	count = device_property_count_u32(dev, "irda-mode-ports");
-	if (count < 0 || count > SC16IS7XX_MAX_PORTS)
+	if (!in_range(count, 0, SC16IS7XX_MAX_PORTS + 1))
 		return;
 
 	ret = device_property_read_u32_array(dev, "irda-mode-ports",
@@ -1425,7 +1426,7 @@ static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s,
 	struct device *dev = s->p[0].port.dev;
 
 	count = device_property_count_u32(dev, "nxp,modem-control-line-ports");
-	if (count < 0 || count > SC16IS7XX_MAX_PORTS)
+	if (!in_range(count, 0, SC16IS7XX_MAX_PORTS + 1))
 		return 0;
 
 	ret = device_property_read_u32_array(dev, "nxp,modem-control-line-ports",
-- 
2.39.2