Re: [PATCH] arm64: dts: meson-axg: jethub-jxx add support for EEPROM

From: Neil Armstrong
Date: Mon Nov 27 2023 - 03:05:42 EST


On 02/11/2023 07:12, Viacheslav Bocharov wrote:
Add dts node for EEPROM placed on baseboard in JetHub D1+ devices.

Signed-off-by: Viacheslav Bocharov <adeep@xxxxxxxxx>
---
.../amlogic/meson-axg-jethome-jethub-j110-rev-2.dts | 12 ++++++++++++
.../amlogic/meson-axg-jethome-jethub-j110-rev-3.dts | 12 ++++++++++++
2 files changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
index 0062667c4f65..2c684f0ca99a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts
@@ -35,3 +35,15 @@ bluetooth {
device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>;
};
};
+
+&i2c_AO {
+ /* EEPROM on base board */
+ eeprompd: eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ pagesize = <0x20>;
+ label = "eeprompd";
+ address-width = <0x10>;
+ vcc-supply = <&vddao_3v3>;
+ };
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
index c2d22b00c1cd..c356bd2cc63a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts
@@ -25,3 +25,15 @@ memory@0 {
&sd_emmc_b {
broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/
};
+
+&i2c_AO {
+ /* EEPROM on base board */
+ eeprompd: eeprom@56 {
+ compatible = "atmel,24c64";
+ reg = <0x56>;
+ pagesize = <0x20>;
+ label = "eeprompd";
+ address-width = <0x10>;
+ vcc-supply = <&vddao_3v3>;
+ };
+};

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>