Re: [PATCH v4 1/2] dt-bindings: i2c: mv64xxx: add reset-gpios property

[Andi Shyti]

Hi Chris,

On Wed, Oct 25, 2023 at 11:30:31AM +1300, Chris Packham wrote:
> Add reset-gpios and reset-duration-us properties to the
> marvell,mv64xxx-i2c binding. These can be used to describe hardware
> where a common reset GPIO is connected to all downstream devices on and
> I2C bus. This reset will be asserted then released before the downstream
> devices on the bus are probed.
> 
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

Acked-by: Andi Shyti <andi.shyti@xxxxxxxxxx>

Thanks,
Andi