Re: [PATCH v2 2/3] arm64: dts: qcom: pm8916: Add BMS and charger

[Konrad Dybcio]

On 10/23/23 08:20, Nikita Travkin wrote:
> pm8916 contains some hardware blocks for battery powered devices:
>
> - VM-BMS: Battery voltage monitoring block.
> - LBC: Linear battery charger.
>
> Add them to the pmic dtsi so the devices that make use of those blocks
> can enable them.
>
> Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
> ---
>   arch/arm64/boot/dts/qcom/pm8916.dtsi | 48 ++++++++++++++++++++++++++++++++++++
>   1 file changed, 48 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
> index f4de86787743..4b2e8fb47d2d 100644
> --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
> @@ -41,6 +41,35 @@ watchdog {
>   			};
>   		};
>   
> +		pm8916_charger: charger@1000 {
> +			compatible = "qcom,pm8916-lbc";
> +			reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>;
> +			reg-names = "chgr", "bat_if", "usb", "misc";
> +
> +			interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
> +				     <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>;
> +			interrupt-names = "vbat_det",
> +					  "fast_chg",
> +					  "chg_fail",
> +					  "chg_done",
> +					  "bat_pres",
> +					  "temp_ok",
> +					  "coarse_det",
> +					  "usb_vbus",
So, both the charger and the USBIN driver use the same irq? :/

Konrad