[PATCH 4/5] arm64: dts: qcom: qrb2210-rb1: Add GPIO LEDs

[Konrad Dybcio]

Add the three LEDs (blue/yellow/green) connected to TLMM GPIOs.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 33 ++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index 5f7619518deb..fd45f58e254d 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/leds/common.h>
 #include "qcm2290.dtsi"
 #include "pm2250.dtsi"
 
@@ -39,6 +40,38 @@ key-volume-up {
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		led-bt {
+			label = "blue:bt";
+			function = LED_FUNCTION_BLUETOOTH;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+			default-state = "off";
+		};
+
+		led-user0 {
+			label = "green:user0";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+
+		led-wlan {
+			label = "yellow:wlan";
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
 	vreg_hdmi_out_1p2: regulator-hdmi-out-1p2 {
 		compatible = "regulator-fixed";
 		regulator-name = "VREG_HDMI_OUT_1P2";

-- 
2.42.0