Re: [PATCH v5 00/12] can: m_can: Optimizations for m_can/tcan part 2

[Markus Schneider-Pargmann]

On Wed, Aug 23, 2023 at 08:51:48AM +0200, Martin Hundebøll wrote:
> On Tue, 2023-07-18 at 09:56 +0200, Markus Schneider-Pargmann wrote:
> > Hi Marc, Simon and everyone,
> > 
> > v5 got a rebase on v6.5 with some small style fixes as pointed out in
> > v4.
> > 
> > It is tested on tcan455x but I don't have hardware with mcan on the
> > SoC
> > myself so any testing is appreciated.
> > 
> > The series implements many small and bigger throughput improvements
> > and
> > adds rx/tx coalescing at the end.
> > 
> > Based on v6.5-rc1. Also available at
> > https://gitlab.baylibre.com/msp8/linux/-/tree/topic/mcan-optimization/v6.5?ref_type=heads
> 
> For the whole series:
> Tested-by: Martin Hundebøll <martin@xxxxxxxxxx>

Thank you Martin!

Best,
Markus

> 
> Thanks,
> Martin
> 
> > Changes in v5:
> > - Add back parenthesis in m_can_set_coalesce(). This will make
> >   checkpatch unhappy but gcc happy.
> > - Remove unused fifo_header variable in m_can_tx_handler().
> > - Rebased to v6.5-rc1
> > 
> > Changes in v4:
> > - Create and use struct m_can_fifo_element in m_can_tx_handler
> > - Fix memcpy_and_pad to copy the full buffer
> > - Fixed a few checkpatch warnings
> > - Change putidx to be unsigned
> > - Print hard_xmit error only once when TX FIFO is full
> > 
> > Changes in v3:
> > - Remove parenthesis in error messages
> > - Use memcpy_and_pad for buffer copy in 'can: m_can: Write transmit
> >   header and data in one transaction'.
> > - Replace spin_lock with spin_lock_irqsave. I got a report of a
> >   interrupt that was calling start_xmit just after the netqueue was
> >   woken up before the locked region was exited. spin_lock_irqsave
> > should
> >   fix this. I attached the full stack at the end of the mail if
> > someone
> >   wants to know.
> > - Rebased to v6.3-rc1.
> > - Removed tcan4x5x patches from this series.
> > 
> > Changes in v2:
> > - Rebased on v6.2-rc5
> > - Fixed missing/broken accounting for non peripheral m_can devices.
> > 
> > previous versions:
> > v1 -
> > https://lore.kernel.org/lkml/20221221152537.751564-1-msp@xxxxxxxxxxxx
> > v2 -
> > https://lore.kernel.org/lkml/20230125195059.630377-1-msp@xxxxxxxxxxxx
> > v3 -
> > https://lore.kernel.org/lkml/20230315110546.2518305-1-msp@xxxxxxxxxxxx/
> > v4 -
> > https://lore.kernel.org/lkml/20230621092350.3130866-1-msp@xxxxxxxxxxxx/
> > 
> > Markus Schneider-Pargmann (12):
> >   can: m_can: Write transmit header and data in one transaction
> >   can: m_can: Implement receive coalescing
> >   can: m_can: Implement transmit coalescing
> >   can: m_can: Add rx coalescing ethtool support
> >   can: m_can: Add tx coalescing ethtool support
> >   can: m_can: Use u32 for putidx
> >   can: m_can: Cache tx putidx
> >   can: m_can: Use the workqueue as queue
> >   can: m_can: Introduce a tx_fifo_in_flight counter
> >   can: m_can: Use tx_fifo_in_flight for netif_queue control
> >   can: m_can: Implement BQL
> >   can: m_can: Implement transmit submission coalescing
> > 
> >  drivers/net/can/m_can/m_can.c | 517 +++++++++++++++++++++++++-------
> > --
> >  drivers/net/can/m_can/m_can.h |  35 ++-
> >  2 files changed, 418 insertions(+), 134 deletions(-)
> > 
> > 
> > base-commit: 06c2afb862f9da8dc5efa4b6076a0e48c3fbaaa5
>