[GIT PULL] TTY/Serial driver changes for 6.6-rc1

From: Greg KH
Date: Fri Sep 01 2023 - 11:20:33 EST

Next message: Mateusz Guzik: "Re: [PATCH v2] x86: bring back rep movsq for user access on CPUs without ERMS"
Previous message: Shuah Khan: "Re: [PATCH 6.5 0/8] 6.5.1-rc1 review"
Next in thread: pr-tracker-bot: "Re: [GIT PULL] TTY/Serial driver changes for 6.6-rc1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The following changes since commit b320441c04c9bea76cbee1196ae55c20288fd7a6:

Merge tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty (2023-08-20 08:26:51 +0200)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git tags/tty-6.6-rc1

for you to fetch changes up to ebf05c7dc92c11b0355aaa0e94064beadaa4b05c:

tty: shrink the size of struct tty_struct by 40 bytes (2023-08-27 11:47:44 +0200)

----------------------------------------------------------------
TTY/Serial driver changes for 6.6-rc1

Here is the big set of tty and serial driver changes for 6.6-rc1.

Lots of cleanups in here this cycle, and some driver updates. Short
summary is:
- Jiri's continued work to make the tty code and apis be a bit more
sane with regards to modern kernel coding style and types
- cpm_uart driver updates
- n_gsm updates and fixes
- meson driver updates
- sc16is7xx driver updates
- 8250 driver updates for different hardware types
- qcom-geni driver fixes
- tegra serial driver change
- stm32 driver updates
- synclink_gt driver cleanups
- tty structure size reduction

All of these have been in linux-next this week with no reported issues.
The last bit of cleanups from Jiri and the tty structure size reduction
came in last week, a bit late but as they were just style changes and
size reductions, I figured they should get into this merge cycle so that
others can work on top of them with no merge conflicts.

Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

----------------------------------------------------------------
Amelie Delaunay (1):
serial: stm32: synchronize RX DMA channel in shutdown

Andy Shevchenko (1):
serial: core: Remove unused PORT_* definitions

Anton Eliasson (1):
tty: serial: samsung: Set missing PM ops for hibernation support

Chengfeng Ye (1):
tty: synclink_gt: Fix potential deadlock on &info->lock

Christophe Leroy (15):
serial: cpm_uart: Avoid suspicious locking
serial: cpm_uart: Remove stale prototypes and table and macros
serial: cpm_uart: Stop using fs_uart_id enum
serial: cpm_uart: Use get_baudrate() instead of uart_baudrate()
serial: cpm_uart: Deduplicate cpm_set_{brg/smc_fcr/scc_fcr}()
serial: cpm_uart: Deduplicate cpm_line_cr_cmd()
serial: cpm_uart: Refactor cpm_uart_allocbuf()/cpm_uart_freebuf()
serial: cpm_uart: Refactor cpm_uart_[un]map_pram()
serial: cpm_uart: Remove cpm_uart/ subdirectory
serial: cpm_uart: Remove stale prototype in powerpc/fsl_soc.c
serial: cpm_uart: Don't include fs_uart_pd.h when not needed
serial: cpm_uart: Remove linux/fs_uart_pd.h
Documentation: devices.txt: Remove ttyIOC*
Documentation: devices.txt: Remove ttySIOC*
Documentation: devices.txt: Fix minors for ttyCPM*

Chunyan Zhang (2):
serial: sprd: Assign sprd_port after initialized to avoid wrong access
serial: sprd: Fix DMA buffer leak issue

Daniel Starke (8):
tty: n_gsm: add restart flag to DLC specific ioctl config
tty: n_gsm: add missing description to structs in gsmmux.h
tty: n_gsm: remove unneeded initialization of ret in gsm_dlci_config
tty: n_gsm: add open_error counter to gsm_mux
tty: n_gsm: increase malformed counter for malformed control frames
tty: n_gsm: increase gsm_mux unsupported counted where appropriate
tty: n_gsm: cleanup gsm_control_command and gsm_control_reply
tty: n_gsm: add restart flag to extended ioctl config

Dmitry Rokosov (8):
tty: serial: meson: use dev_err_probe
tty: serial: meson: redesign the module to platform_driver
tty: serial: meson: apply ttyS devname instead of ttyAML for new SoCs
tty: serial: meson: introduce separate uart_data for S4 SoC family
tty: serial: meson: add independent uart_data for A1 SoC family
dt-bindings: serial: amlogic,meson-uart: support Amlogic A1
arm64: dts: meson: a1: change uart compatible string
tty: serial: meson: refactor objects definition for different devnames

Duje Mihanović (1):
tty: serial: 8250: Define earlycon for mrvl,mmp-uart

Greg Kroah-Hartman (3):
Merge 6.5-rc4 into tty-next
Merge commit b320441c04c9 ("Merge tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next
tty: shrink the size of struct tty_struct by 40 bytes

Hugo Villeneuve (8):
serial: max310x: add comments for membase address workaround
serial: max310x: fix typos in comments
serial: sc16is7xx: fix broken port 0 uart init
serial: sc16is7xx: remove obsolete out_thread label
dt-bindings: sc16is7xx: Add property to change GPIO function
serial: sc16is7xx: fix regression with GPIO configuration
serial: sc16is7xx: fix bug when first setting GPIO direction
serial: sc16is7xx: add missing support for rs485 devicetree properties

Hui Wang (1):
serial: sc16is7xx: Put IOControl register into regmap_volatile

Jiapeng Chong (1):
8250_men_mcb: Fix unsigned comparison with less than zero

Jiaqing Zhao (4):
can: ems_pci: remove PCI_SUBVENDOR_ID_ASIX definition
can: ems_pci: move ASIX AX99100 ids to pci_ids.h
serial: 8250_pci: add support for ASIX AX99100
parport_pc: add support for ASIX AX99100

Jiri Slaby (34):
tty: make check_tty_count() void
n_tty: drop fp from n_tty_receive_buf_real_raw()
n_tty: simplify and sanitize zero_buffer()
n_tty: pass ldata to canon_skip_eof() directly
n_tty: make many tty parameters const
tty: sysrq: rename and re-type i in sysrq_handle_loglevel()
tty: sysrq: switch sysrq handlers from int to u8
tty: sysrq: switch the rest of keys to u8
tty: sysrq: use switch in sysrq_key_table_key2index()
serial: convert uart sysrq handling to u8
serial: make uart_insert_char() accept u8s
serial: pass state to __uart_start() directly
serial: arc_uart: simplify flags handling in arc_serial_rx_chars()
serial: omap-serial: remove flag from serial_omap_rdi()
serial: drivers: switch ch and flag to u8
serial: move WARN_ON() in uart_write() to the condition
Bluetooth: rfcomm: remove casts from tty->driver_data
tty: hvsi: remove an extra variable from hvsi_write()
input: serport: remove casts from tty->disc_data
can: slcan: remove casts from tty->disc_data
serial: altera_jtaguart: switch status to u32
speakup: switch to unsigned iterator in spk_ttyio_receive_buf2()
misc: ti-st: remove forward declarations and make st_int_recv() static
misc: ti-st: remove ptr from recv functions
misc: ti-st: don't check for tty data == NULL
tty: synclink_gt: convert CALC_REGADDR() macro to an inline
tty: synclink_gt: drop global slgt_driver_name array
tty: synclink_gt: define global strings as const strings
tty: synclink_gt: drop info messages from init/exit functions
tty: synclink_gt: use PCI_VDEVICE
tty: synclink_gt: make default_params const
tty: synclink_gt: mark as BROKEN
can: can327: remove casts from tty->disc_data
net: nfc: remove casts from tty->disc_data

Jiri Slaby (SUSE) (62):
tty: xtensa/iss: drop unneeded tty_operations hooks
tty: ldisc: document that ldops are optional
tty: remove dummy tty_ldisc_ops::poll() implementations
tty: n_null: remove optional ldops
tty: change tty_write_lock()'s ndelay parameter to bool
tty: tty_port: rename 'disc' to 'ld'
tty: drop tty_debug_wait_until_sent()
tty: make tty_change_softcar() more understandable
tty: make tty_port_client_operations operate with u8
tty: make counts in tty_port_client_operations hooks size_t
tty: switch receive_buf() counts to size_t
tty: switch count in tty_ldisc_receive_buf() to size_t
tty: can327: unify error paths in can327_ldisc_rx()
tty: can327, move overflow test inside can327_ldisc_rx()'s loop
tty: make tty_ldisc_ops::*buf*() hooks operate on size_t
tty: use u8 for chars
tty: use u8 for flags
misc: ti-st: make st_recv() conforming to tty_ldisc_ops::receive_buf()
tty: make char_buf_ptr()/flag_buf_ptr()'s offset unsigned
tty: tty_buffer: make all offsets unsigned
tty: don't pass write() to do_tty_write()
tty: rename and de-inline do_tty_write()
tty: use min() in iterate_tty_write()
tty: use ssize_t for iterate_tty_read() returned type
tty: switch size and count types in iterate_tty_read() to size_t
tty: use min() for size computation in iterate_tty_read()
tty: propagate u8 data to tty_operations::write()
tty: propagate u8 data to tty_operations::put_char()
tty: make tty_operations::write()'s count size_t
tty: audit: unify to u8
tty: ldops: unify to u8
tty: hvc: convert counts to size_t
tty: vcc: convert counts to size_t
tty: gdm724x: convert counts to size_t
tty: hso: simplify hso_serial_write()
tty: rfcomm: convert counts to size_t
tty: gdm724x: simplify gdm_tty_write()
tty: gdm724x: use min_t() for size_t varable and a constant
tty: tty_buffer: switch data type to u8
tty: tty_buffer: use struct_size() in tty_buffer_alloc()
tty: tty_buffer: unify tty_insert_flip_string_{fixed_flag,flags}()
tty: tty_buffer: warn if losing flags in __tty_insert_flip_string_flags()
tty: tty_buffer: switch insert functions to size_t
tty: tty_buffer: let tty_prepare_flip_string() return size_t
tty: tty_buffer: use __tty_insert_flip_string_flags() in tty_insert_flip_char()
tty: tty_buffer: better types in __tty_buffer_request_room()
tty: tty_buffer: initialize variables in initializers already
tty: tty_buffer: invert conditions in __tty_buffer_request_room()
tty: n_tty: make flow of n_tty_receive_buf_common() a bool
tty: n_tty: use output character directly
tty: n_tty: use 'num' for writes' counts
tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
tty: n_tty: make n_tty_data::num_overrun unsigned
tty: n_tty: use MASK() for masking out size bits
tty: n_tty: move canon handling to a separate function
tty: n_tty: move newline handling to a separate function
tty: n_tty: remove unsigned char casts from character constants
tty: n_tty: simplify chars_in_buffer()
tty: n_tty: use u8 for chars and flags
tty: n_tty: unify counts to size_t
tty: n_tty: extract ECHO_OP processing to a separate function
tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()

Jisheng Zhang (2):
dt-bindings: serial: snps-dw-apb-uart: make interrupt optional
serial: 8250_dw: fall back to poll if there's no interrupt

Johan Hovold (3):
serial: qcom-geni: use icc tag defines
serial: qcom-geni: fix opp vote on shutdown
serial: qcom-geni: clean up clock-rate debug printk

Jon Hunter (1):
serial: tegra: Don't print error on probe deferral

Justin Chen (1):
serial: 8250_bcm7271: improve bcm7271 8250 port

Li Zetao (3):
tty: serial: Remove redundant initialization for ma35d1serial_driver
8250_men_mcb: Fix unsigned expression compared with zero
8250_men_mcb: Remove redundant initialization owner in mcb_driver

Lucas Tanure (3):
dt-bindings: serial: amlogic,meson-uart: Add compatible string for T7
tty: serial: meson: Add a earlycon for the T7 SoC
Revert "tty: serial: meson: Add a earlycon for the T7 SoC"

Nick Hu (1):
serial: sifive: Add suspend and resume operations

Rob Herring (1):
tty: Explicitly include correct DT includes

Rodríguez Barbarin, José Javier (3):
8250_men_mcb: Add clockrate speed for G215/F215 boards
8250_men_mcb: Read num ports from register data.
8250_men_mcb: Make UART config auto configurable

Ruan Jinjie (2):
tty: serial: xilinx_uartps: Do not check for 0 return after calling platform_get_irq()
serial: sifive: Remove redundant of_match_ptr()

Sanjuán García, Jorge (1):
8250_men_mcb: remove unnecessary cast when reading register

Sherry Sun (3):
dt-bindings: serial: fsl-lpuart: correct imx93-lpuart dt-binding item
tty: serial: fsl_lpuart: move the lpuart32_int() below
tty: serial: fsl_lpuart: add IDLE interrupt support for rx_dma on imx7ulp/imx8ulp/imx8qxp

Thadeu Lima de Souza Cascardo (1):
tty: n_gsm: require CAP_NET_ADMIN to attach N_GSM0710 ldisc

Valentin Caron (5):
serial: stm32: avoid clearing DMAT bit during transfer
serial: stm32: use DMAT as a configuration bit
serial: stm32: modify parameter and rename stm32_usart_rx_dma_enabled
serial: stm32: group dma pause/resume error handling into single function
serial: stm32: replace access to DMAR bit by dmaengine_pause/resume

Vijaya Krishna Nivarthi (1):
tty: serial: qcom-geni-serial: Poll primary sequencer irq status after cancel_tx

Yang Yingliang (1):
8250_men_mcb: fix error handling in read_uarts_available_from_reg()

Yangtao Li (15):
serial: ar933x: Use devm_platform_get_and_ioremap_resource()
serial: bcm63xx-uart: Use devm_platform_get_and_ioremap_resource()
serial: clps711x: Use devm_platform_get_and_ioremap_resource()
serial: linflexuart: Use devm_platform_get_and_ioremap_resource()
serial: tegra: Use devm_platform_get_and_ioremap_resource()
serial: omap: Use devm_platform_get_and_ioremap_resource()
serial: fsl_lpuart: Use devm_platform_get_and_ioremap_resource()
serial: vt8500: Use devm_platform_get_and_ioremap_resource()
serial: mps2-uart: Use devm_platform_get_and_ioremap_resource()
serial: sprd: Use devm_platform_get_and_ioremap_resource()
serial: sccnxp: Use devm_platform_get_and_ioremap_resource()
serial: mvebu-uart: Use devm_platform_get_and_ioremap_resource()
serial: sifive: Use devm_platform_get_and_ioremap_resource()
serial: imx: Use devm_platform_get_and_ioremap_resource()
serial: st-asc: Use devm_platform_get_and_ioremap_resource()

Yi Yang (1):
serial: tegra: handle clk prepare error in tegra_uart_hw_init()

Yuanjun Gong (1):
drivers:tty: fix return value check in asc_init_port

oushixiong (1):
tty: vt: Remove some repetitive initialization

Documentation/admin-guide/devices.txt | 16 +-
.../bindings/serial/amlogic,meson-uart.yaml | 6 +
.../devicetree/bindings/serial/fsl-lpuart.yaml | 6 +-
.../devicetree/bindings/serial/nxp,sc16is7xx.txt | 46 ++
.../bindings/serial/snps-dw-apb-uart.yaml | 1 -
Documentation/driver-api/tty/tty_buffer.rst | 7 +-
arch/alpha/kernel/setup.c | 2 +-
arch/alpha/kernel/srmcons.c | 5 +-
arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 4 +-
arch/loongarch/kernel/sysrq.c | 2 +-
arch/m68k/emu/nfcon.c | 8 +-
arch/mips/kernel/sysrq.c | 2 +-
arch/powerpc/include/asm/fs_pd.h | 10 -
arch/powerpc/platforms/8xx/mpc885ads_setup.c | 1 -
arch/powerpc/platforms/8xx/tqm8xx_setup.c | 1 -
arch/powerpc/sysdev/fsl_soc.c | 2 -
arch/powerpc/xmon/xmon.c | 2 +-
arch/sparc/include/asm/vio.h | 2 +-
arch/sparc/kernel/process_64.c | 4 +-
arch/um/drivers/line.c | 2 +-
arch/um/drivers/line.h | 3 +-
arch/xtensa/platforms/iss/console.c | 27 +-
drivers/accessibility/speakup/spk_ttyio.c | 7 +-
drivers/bluetooth/hci_ldisc.c | 15 +-
drivers/char/ttyprintk.c | 5 +-
drivers/gpu/drm/drm_fb_helper.c | 2 +-
drivers/input/serio/serport.c | 18 +-
drivers/ipack/devices/ipoctal.c | 7 +-
drivers/isdn/capi/capi.c | 8 +-
drivers/misc/bcm-vk/bcm_vk_tty.c | 5 +-
drivers/misc/ti-st/st_core.c | 18 +-
drivers/misc/ti-st/st_kim.c | 13 +-
drivers/mmc/core/sdio_uart.c | 4 +-
drivers/net/caif/caif_serial.c | 2 +-
drivers/net/can/can327.c | 47 +-
drivers/net/can/sja1000/ems_pci.c | 7 +-
drivers/net/can/slcan/slcan-core.c | 13 +-
drivers/net/hamradio/6pack.c | 4 +-
drivers/net/hamradio/mkiss.c | 4 +-
drivers/net/mctp/mctp-serial.c | 5 +-
drivers/net/ppp/ppp_async.c | 26 +-
drivers/net/ppp/ppp_synctty.c | 26 +-
drivers/net/slip/slip.c | 4 +-
drivers/net/usb/hso.c | 20 +-
drivers/parport/parport_pc.c | 5 +
drivers/s390/char/con3215.c | 6 +-
drivers/s390/char/con3270.c | 6 +-
drivers/s390/char/sclp_tty.c | 10 +-
drivers/s390/char/sclp_vt220.c | 6 +-
drivers/staging/gdm724x/gdm_tty.c | 17 +-
drivers/staging/greybus/uart.c | 3 +-
drivers/tty/Kconfig | 1 +
drivers/tty/amiserial.c | 4 +-
drivers/tty/ehv_bytechan.c | 4 +-
drivers/tty/goldfish.c | 7 +-
drivers/tty/hvc/hvc_console.c | 4 +-
drivers/tty/hvc/hvc_opal.c | 2 +-
drivers/tty/hvc/hvcs.c | 10 +-
drivers/tty/hvc/hvsi.c | 15 +-
drivers/tty/ipwireless/hardware.c | 2 +-
drivers/tty/ipwireless/tty.c | 4 +-
drivers/tty/mips_ejtag_fdc.c | 6 +-
drivers/tty/moxa.c | 8 +-
drivers/tty/mxser.c | 4 +-
drivers/tty/n_gsm.c | 89 ++-
drivers/tty/n_hdlc.c | 12 +-
drivers/tty/n_null.c | 25 +-
drivers/tty/n_tty.c | 613 +++++++++++----------
drivers/tty/nozomi.c | 6 +-
drivers/tty/pty.c | 2 +-
drivers/tty/rpmsg_tty.c | 5 +-
drivers/tty/serdev/serdev-ttyport.c | 4 +-
drivers/tty/serial/21285.c | 3 +-
drivers/tty/serial/8250/8250_bcm7271.c | 4 +-
drivers/tty/serial/8250/8250_dw.c | 5 +-
drivers/tty/serial/8250/8250_early.c | 1 -
drivers/tty/serial/8250/8250_ingenic.c | 1 -
drivers/tty/serial/8250/8250_men_mcb.c | 210 +++++--
drivers/tty/serial/8250/8250_omap.c | 1 -
drivers/tty/serial/8250/8250_pci.c | 10 +
drivers/tty/serial/8250/8250_port.c | 11 +-
drivers/tty/serial/8250/8250_pxa.c | 1 +
drivers/tty/serial/Makefile | 2 +-
drivers/tty/serial/altera_jtaguart.c | 4 +-
drivers/tty/serial/altera_uart.c | 2 +-
drivers/tty/serial/amba-pl010.c | 3 +-
drivers/tty/serial/amba-pl011.c | 5 +-
drivers/tty/serial/apbuart.c | 6 +-
drivers/tty/serial/ar933x_uart.c | 3 +-
drivers/tty/serial/arc_uart.c | 27 +-
drivers/tty/serial/atmel_serial.c | 3 +-
drivers/tty/serial/bcm63xx_uart.c | 8 +-
drivers/tty/serial/clps711x.c | 6 +-
.../{cpm_uart/cpm_uart_core.c => cpm_uart.c} | 157 +++++-
drivers/tty/serial/{cpm_uart => }/cpm_uart.h | 38 +-
drivers/tty/serial/cpm_uart/Makefile | 12 -
drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c | 122 ----
drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h | 33 --
drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c | 156 ------
drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h | 33 --
drivers/tty/serial/digicolor-usart.c | 3 +-
drivers/tty/serial/dz.c | 2 +-
drivers/tty/serial/fsl_linflexuart.c | 10 +-
drivers/tty/serial/fsl_lpuart.c | 88 ++-
drivers/tty/serial/imx.c | 4 +-
drivers/tty/serial/ip22zilog.c | 2 +-
drivers/tty/serial/kgdb_nmi.c | 3 +-
drivers/tty/serial/lantiq.c | 3 +-
drivers/tty/serial/liteuart.c | 3 +-
drivers/tty/serial/ma35d1_serial.c | 3 +-
drivers/tty/serial/max3100.c | 3 +-
drivers/tty/serial/max310x.c | 10 +-
drivers/tty/serial/mcf.c | 2 +-
drivers/tty/serial/meson_uart.c | 138 +++--
drivers/tty/serial/milbeaut_usio.c | 3 +-
drivers/tty/serial/mpc52xx_uart.c | 2 +-
drivers/tty/serial/mps2-uart.c | 4 +-
drivers/tty/serial/mvebu-uart.c | 11 +-
drivers/tty/serial/mxs-auart.c | 5 +-
drivers/tty/serial/omap-serial.c | 11 +-
drivers/tty/serial/pic32_uart.c | 1 -
drivers/tty/serial/pxa.c | 2 +-
drivers/tty/serial/qcom_geni_serial.c | 17 +-
drivers/tty/serial/rp2.c | 4 +-
drivers/tty/serial/sa1100.c | 3 +-
drivers/tty/serial/samsung_tty.c | 8 +-
drivers/tty/serial/sb1250-duart.c | 3 +-
drivers/tty/serial/sc16is7xx.c | 170 ++++--
drivers/tty/serial/sccnxp.c | 7 +-
drivers/tty/serial/serial-tegra.c | 29 +-
drivers/tty/serial/serial_core.c | 28 +-
drivers/tty/serial/serial_txx9.c | 3 +-
drivers/tty/serial/sh-sci.c | 1 -
drivers/tty/serial/sifive.c | 29 +-
drivers/tty/serial/sprd_serial.c | 38 +-
drivers/tty/serial/st-asc.c | 9 +-
drivers/tty/serial/stm32-usart.c | 312 ++++++-----
drivers/tty/serial/stm32-usart.h | 1 +
drivers/tty/serial/sunhv.c | 4 +-
drivers/tty/serial/sunplus-uart.c | 2 +-
drivers/tty/serial/sunsab.c | 3 +-
drivers/tty/serial/sunsu.c | 4 +-
drivers/tty/serial/sunzilog.c | 4 +-
drivers/tty/serial/tegra-tcu.c | 1 -
drivers/tty/serial/uartlite.c | 3 -
drivers/tty/serial/ucc_uart.c | 4 +-
drivers/tty/serial/vt8500_serial.c | 8 +-
drivers/tty/serial/xilinx_uartps.c | 4 +-
drivers/tty/serial/zs.c | 3 +-
drivers/tty/synclink_gt.c | 83 ++-
drivers/tty/sysrq.c | 84 ++-
drivers/tty/tty.h | 8 +-
drivers/tty/tty_audit.c | 6 +-
drivers/tty/tty_buffer.c | 192 ++-----
drivers/tty/tty_io.c | 50 +-
drivers/tty/tty_ioctl.c | 18 +-
drivers/tty/tty_port.c | 34 +-
drivers/tty/ttynull.c | 4 +-
drivers/tty/vcc.c | 18 +-
drivers/tty/vt/selection.c | 2 +-
drivers/tty/vt/vt.c | 22 +-
drivers/usb/class/cdc-acm.c | 8 +-
drivers/usb/gadget/function/u_serial.c | 6 +-
drivers/usb/host/xhci-dbgtty.c | 7 +-
drivers/usb/serial/usb-serial.c | 5 +-
include/linux/fs_uart_pd.h | 71 ---
include/linux/pci_ids.h | 4 +
include/linux/serial_core.h | 18 +-
include/linux/sysrq.h | 18 +-
include/linux/ti_wilink_st.h | 2 +-
include/linux/tty.h | 18 +-
include/linux/tty_buffer.h | 20 +-
include/linux/tty_driver.h | 9 +-
include/linux/tty_flip.h | 70 ++-
include/linux/tty_ldisc.h | 67 ++-
include/linux/tty_port.h | 7 +-
include/uapi/linux/gsmmux.h | 118 +++-
include/uapi/linux/serial_core.h | 44 +-
kernel/debug/debug_core.c | 2 +-
kernel/power/poweroff.c | 2 +-
kernel/rcu/tree_stall.h | 2 +-
net/bluetooth/rfcomm/tty.c | 31 +-
net/nfc/nci/uart.c | 23 +-
sound/soc/codecs/cx20442.c | 4 +-
sound/soc/ti/ams-delta.c | 2 +-
185 files changed, 2104 insertions(+), 2156 deletions(-)
rename drivers/tty/serial/{cpm_uart/cpm_uart_core.c => cpm_uart.c} (90%)
rename drivers/tty/serial/{cpm_uart => }/cpm_uart.h (64%)
delete mode 100644 drivers/tty/serial/cpm_uart/Makefile
delete mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm1.c
delete mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm1.h
delete mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c
delete mode 100644 drivers/tty/serial/cpm_uart/cpm_uart_cpm2.h
delete mode 100644 include/linux/fs_uart_pd.h

Next message: Mateusz Guzik: "Re: [PATCH v2] x86: bring back rep movsq for user access on CPUs without ERMS"
Previous message: Shuah Khan: "Re: [PATCH 6.5 0/8] 6.5.1-rc1 review"
Next in thread: pr-tracker-bot: "Re: [GIT PULL] TTY/Serial driver changes for 6.6-rc1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]