Re: [PATCHv2 0/7] DRA7: DT thermal support
From: Zhang Rui
Date: Mon Jan 06 2014 - 09:46:53 EST
On Mon, 2014-01-06 at 08:36 -0400, Eduardo Valentin wrote:
> Hello all,
>
> Now that the basic thermal DT support is merged into Rui's tree,
> I am resending this series, which introduces the DT node entries
> for DRA7 thermal limits representation.
>
> The series adds two thermal zones, to represent IVA and DSPEVE,
> respectively. It also adds the support to tmp102 and a corresponding
> pcb thermal zone.
>
> There are only cosmetic changes from v1. A couple of spaces and tabulations
> have been fixed, and minor changes in sentences present in commit log.
> One difference from V1 is the fact that now bandgap is introduced under
> OCP, which is also a minor diff.
>
> This patch series has been runtime tested on DRA7-evm.
>
> All best
>
> Eduardo Valentin (7):
> arm: dts: add dra7 DSPEVE thermal data
> arm: dts: add dra7 IVA thermal data
> arm: dts: dra7: add bandgap entry
> arm: dts: add cooling properties on dra7 cpu node
> arm: dts: dra7: add thermal data
> arm: dts: add tmp102 i2c sensor node on dra7-evm
> arm: dts: add thermal zones info on tmp102 for DRA7-EVM
>
> arch/arm/boot/dts/dra7-dspeve-thermal.dtsi | 28 ++++++++++++++++++++++++++++
> arch/arm/boot/dts/dra7-evm.dts | 22 ++++++++++++++++++++++
> arch/arm/boot/dts/dra7-iva-thermal.dtsi | 28 ++++++++++++++++++++++++++++
> arch/arm/boot/dts/dra7.dtsi | 26 ++++++++++++++++++++++++++
I'm okay with this patch set. But as long as this patch set does not
change any code under drivers/thermal/, I prefer these patches to go to
your thermal-soc tree first.
thanks,
rui
> 4 files changed, 104 insertions(+)
> create mode 100644 arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
> create mode 100644 arch/arm/boot/dts/dra7-iva-thermal.dtsi
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/